1. Manuals
  2. Brands
  3. Docomo Manuals
  4. Cell Phone
  5. L-04B STYLE Series
  6. Instruction manual

Docomo L-04B Instruction Manual

Style series
Hide thumbs Also See for L-04B:
Table of Contents

Advertisement

Quick Links

Download this manual
L-04B
'10.5
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-04B and is the answer not in the manual?

Questions and answers

Related Manuals for Docomo L-04B

Summary of Contents for Docomo L-04B

  • Page 1 L-04B ’10.5 INSTRUCTION MANUAL...
  • Page 2 Read this manual before use to correctly operate your L-04B. Operation Description of L-04B Operations of L-04B are described in this manual as well as "Guide" (installed in this FOMA terminal, Japanese only) and "Instruction Manual (Detailed version, Japanese only)" (in PDF format).
  • Page 3 Contents Introduction FOMA Terminal What You Can Do with L-04B Part Names and Functions Precautions Handling Precautions Basic Operation Before Using Screen Explanation Character Entry Sound/Screen Setting Lock/Security Connect Call Telephone Mail Phonebook Search i-mode/Full Browser i-Channel Enjoy α Camera Music i-...
  • Page 4 FOMA terminal. • It is recommended that you save important data on a microSD card. If you use a PC, use DOCOMO keitai datalink to send and save data such as Phonebook entries, mail messages, Schedule events, etc. to the...
  • Page 5 What You Can Do with L-04B Guide (Japanese only)→P21 Full browser→P51 Guide pre-installed in the FOMA terminal allows you You can browse web pages incompatible with i-mode to look for operating instructions of a desired on the FOMA terminal in the same way as on a PC.

  • Page 6: Part Names And Functions

    Part Names and Functions ●Front ●Rear ●Left side ●Right side • The microSD card insertion position is underneath the battery pack inside the back cover. → P65...
  • Page 7 Infrared port Navigation Right key Charging terminals Display the redial list screen. Earpiece External connector terminal GCamera key lLock key Display Display the still image shooting Press for over 1 second to set/ MMenu key screen. cancel the key lock. Display the main menu.
  • Page 8 Precautions (ALWAYS FOLLOW THESE PRECAUTIONS) Before using your FOMA terminal, read these "Precautions" carefully so that you can use it correctly. After reading these Denotes not to disassemble. precautions, keep this manual for later reference. disassembly Be sure to observe these precautions because they are intended to protect you or others around you from causing injury and to avoid damage to the property.
  • Page 9 Use battery packs and Make sure to turn off the General Precautions for adapters specifi ed by NTT FOMA terminal before you DOCOMO. go to a place such as a gas FOMA Terminal, Battery station where fl ammable Fire, burns, injury, or electric Pack, Adapter, and UIM shock may result.
  • Page 10 Pay extra attention when you CAUTION Do not directly point the use the FOMA terminal for an infrared port at home extended period of time while Do not place the FOMA appliances with the infrared Don’t it is connected to the adapter. terminal and its accessories device.
  • Page 11 When you use Hands-free, Turn the FOMA terminal off in If the display glass or camera or a ring tone is sounding, places near high-precision lens is broken, avoid touching make sure to keep the FOMA electronic devices or devices the broken glass or exposed terminal away from your ear.
  • Page 12 If the display is broken and If you use the FOMA terminal Precautions for the LCD liquid leaks, do not in a car, contact the car apply the liquid to your skin manufacturer or dealer to ask Don’t Battery Pack such as face or hand.
  • Page 13 Do not use a damaged tape and take them to the adapter cord. If you found any trouble on docomo Shop, etc. or dispose the battery pack such as Fire, burns, or electric shock may of them in accordance with local Don’t...
  • Page 14 Do not use the AC adapter Do not place heavy objects If the fuse of the DC adapter and desktop holder in a place on the adapter cord. blows, replace it with the with high humidity such as a specifi ed fuse. Fire, burns, or electric shock may Don’t Don’t...
  • Page 15 If you do not use the adapter ● Turn the FOMA terminal Precautions for UIM off in hospital lobbies and for a long time, unplug the corridors if electronic medical power plug from the outlet or Unplug devices could be nearby. cigarette lighter socket.

  • Page 16: Material List

    Material List If you use an implanted Material/Surface Part treatment cardiac pacemaker or implanted defi brillator, use Material/Surface Screws MILD STEEL/ZnB plating Part or carry the FOMA terminal treatment Battery pack 22cm or more away from the Outer case implanted cardiac pacemaker Battery pack LUPOLY GN1002FL KPA1 or implanted defi...

  • Page 17: Handling Precautions

    • safe location. a dry cloth, the display may be sat upon while in your pocket, the DOCOMO assumes no responsibility scratched. display, internal circuit board, or for the loss of any of your data. battery pack may be damaged or If the display is left with water drop •...
  • Page 18 When you store the battery pack, Do not insert an external device Do not place magnetic media near avoid the following conditions. to the external connector terminal the FOMA terminal. (earphone/microphone terminal) Data on magnetic media such as cash Fully charged (immediately after •...
  • Page 19 UIM to a service standards of specifi ed radio equipment Notes on the UIM counter such as the docomo Shop. based on the Radio Law. As a proof, Do not use excessive force to insert/ "Technical conformity mark "...

  • Page 20: Before Using

    Before Using With the " " side Attaching UIM (FOMA Card)/Battery Pack Tabs of the battery The UIM is an IC card that contains subscription pack up, align the information such as your phone number. metal contacts of Turn the FOMA terminal power off and hold it with both •...

  • Page 21: Charging With Ac Adapter

    Charging with AC adapter Charging Open the external connector terminal cover of Charging with desktop holder the FOMA terminal (a) and fl ip it over (b). With the inscribed arrow side up, insert the AC adapter While holding the desktop holder (optional), insert connector straight into the external connector the AC adapter connector, with the inscribed terminal of the FOMA terminal.
  • Page 22 Turning Power ON Confi guring Default Setting After turning the power ON for the fi rst time, set Turning power ON "Set Date&Time", "Change security code", and With the power turned OFF, P (for over "KeyPad Sound(ON/OFF)" as default settings. 2 seconds) Turn the power ON "Yes"...
  • Page 23 Editing your own number Preventing Key Misoperations Stand-by display "Own Number" When you put the FOMA terminal in your bag, it C[Detail] Enter the Terminal security is recommended to set the key lock in order to code prevent key misoperation. M[Menu] "Edit"...

  • Page 24: Screen Explanation

    Screen Explanation Signal strength Viewing Display/Icon Strong Weak The meanings of icons displayed at the top of the Out of service area or no signal reception screen are as follows. a b cdef g hi Voice call in progress i-mode connection in progress while blinking i-mode mail stored at the i-mode center Unread i-mode mail Unread MessageR...

  • Page 25: Table Of Contents

    Record message set Viewing Main Menu Alarm set On the FOMA terminal, execute functions, set Today's schedule or To do set items, or save entries or data from menus such as main menu or sub menu. microSD card inserted Outgoing voice/videophone calls restricted Outgoing mails restricted Data access lock set Notifi...
  • Page 26 Function Operation Description Operation Own Number Navigation Up/Down key Navigation Up or Down key. Settings Press Navigation Left or Navigation Left/Right key Right key. Osaifu-Keitai * Depending on the main menu design, the description Soft Key Operation of menu name may differ. Available operations on the currently opened Navigation Key Operation screen are displayed as Soft keys at the bottom of...

  • Page 27: Menu Operation

    When using Dial keys Menu Operation In Stand-by, press M to display the Main This section explains operations for accessing menu the main menu from the Stand-by display and displaying the setting screen for "Color theme" in Press * corresponding to "Settings" to the following two ways.

  • Page 28: Character Entry

    Character Entry Switching input mode Entering Characters Switch the input mode according to the character type to be input. In some input modes, switching Character entry is required in various situations between full-pitch and half-pitch characters is such as when saving entries to Phonebook or available.
  • Page 29 Use Navigation Up/Down key to move the function: predicts the next phrase from the cursor to the Prediction option fi eld characters being entered. Example: Entering characters " ドコモ太郎 (DOCOMO Move the cursor to "太郎 (Taro)" Taro)" in Hiragana and Kanji input mode C[Set] On the Character entry screen, enter "どこ...

  • Page 30: Adjusting Volume

    Sound/Screen Setting I[Done] Changing Ring Tone Stand-by display "Settings" Using Manner Mode "Sounds & Vibration" "Select ring tone" #(for over 1 second) Stand-by display Select an item and select a fi le When the Manner mode is set, appears at the top of the screen.
  • Page 31 Changing main menu design Changing Screen Settings Set the menu design displayed when M is pressed in Stand-by. Changing Stand-by display M[Menu] Stand-by display Stand-by display "Settings" "Menu priority" "Custom menu"/"Basic "Display" "Stand-by display" menu" "Yes" Set each item Information To switch the menu temporarily, press G[Basic]/ •...
  • Page 32 Information Move the cursor to "Missed call" or C[ON] Kisekae Tool can also be set using the following steps. • "Unread message" Stand-by display [Kisekae] move I[Done] the cursor to "i-mode"/"Preinstalled" [Open] To reset the setting, press [Menu] on the Kisekae •...

  • Page 33: Network Security Code

    (driver's license, etc.), the FOMA terminal, and UIM to the docomo Shop. For details, If you have "docomo ID and Password" for "My docomo", a total support site for a PC, you can change the Network contact "General Inquiries" at the back of this manual.
  • Page 34 Contact the Failed 10 (At the time of contract: 0000) Enter docomo Shop. times in a row PIN2 code You can set PIN1 and PIN2 codes to the UIM. PIN1 code is a 4- to 8-digit number to be entered to identify the...

  • Page 35: Various Lock Functions

    * Unavailable from part of IP phones. To cancel Lock all Can be set/canceled from the My • While Lock all is set, press docomo site (Japanese only) using M[Unlock] or press any dial a PC. enter the Terminal security For details on Omakase Lock, see •...
  • Page 36 Lock function Description Lock function Description Self mode Disables all functions that require Auto key lock Sets the key lock automatically when communication, such as making/ the time set in "Display duration" receiving calls, using i-mode, or elapses without any operation of the sending/receiving mails.

  • Page 37: Restricting Incoming Calls

    Restricting Incoming Calls Resetting to Default Setting actions when anonymous calls Resetting various function settings to arrive defaults Reject incoming calls without caller ID per reason Reset the settings you have changed in functions for anonymous call. to defaults. Stand-by display "Settings"...

  • Page 38: Call Telephone

    Call Telephone This FOMA terminal is not equipped with Inner Making a call from Phonebook camera. So the image sent to the other party Stand-by display Navigation Down key during videophone call is a still image or current image captured with Outer camera. Move the cursor to the entry to call Making a Call/Videophone Call To make a videophone call...

  • Page 39: Making An International Call

    For details on WORLD CALL, contact "General • "NW Services" "Caller ID notifi cation" Inquiries" at the back of this manual. "Activate/Deactivate" If you use international carriers other than DOCOMO, • contact them directly. "Notify"/"Not notify" Stand-by display Enter "010 - Country...

  • Page 40: Adjusting Earpiece Volume

    I[Done] During a videophone call When the Record message is set, appears at the Press I [Camera/Image] to switch the image to send top of the screen. between the camera image and the substitute image. Playing Record message To end the call, P Stand-by display "Media"...
  • Page 41 • Available network services service area or where there is no signal reception. For subscription or inquiries, contact "General The following DOCOMO network services are available • Inquiries" at the back of this manual. for the FOMA terminal. "OFFICEED" is a fee-based service requiring •...

  • Page 42: Setting Call Waiting

    Setting Voice mail service Available service Phone number Weather forecast (Charges apply) City code of the Stand-by display "Settings" desired area + 177 "NW Services" "Voice mail" Select an Emergency calls to police (No prefi x) 110 item Emergency calls to fi re station and (No prefi...

  • Page 43: Using Overseas

    When you carrier associated with DOCOMO, with the same do not notify of your caller ID by dialing such as with phone number and mail address. You can use "184"...

  • Page 44: Available Services

    For countries, regions, and international carriers you can access, see "Mobile Phone User s Guide If an area code (city code) starts with "0", remove • [International Services] or DOCOMO International "0". (When calling some countries such as Italy, "0" Services website. may be required.)
  • Page 45 To make a videophone call To make a videophone call Press I [V. phone]. Press I [V. phone]. Receiving a call overseas Making a call to a person in the country you stay A call arrives Make a call by dialing the other party's phone number from the area code (city code).

  • Page 46: Mail

    Mail Attaching and sending a fi le Sending i-mode Mail Attach an image or melody to i-mode mail to send. Upon subscription to i-mode, you can exchange Up to 10 fi les, a total of 2MB, can be attached. • e-mail via the Internet, as well as between i-mode Stand-by display "Compose...
  • Page 47 C[Set] I[Send] Sending Deco-mail Create your designed mail by adding decorations Viewing Received i-mode Mail such as changing font size, font color or background color, or inserting images when When the FOMA terminal is in the service area, editing i-mode mail. i-mode mail is automatically sent from the i-mode center.
  • Page 48 Replying to i-mode mail Sorting mails Reply to the sender of i-mode mail. Replying can Set sorting criteria to automatically save mails to be made by entering new text or quoting the text specifi ed folders. of the received i-mode mail. Create sorting folders in "Inbox"...

  • Page 49: Using Sms

    Viewing received SMS Using SMS SMS messages are sent automatically when the FOMA terminal is in the service area. Sending SMS Send a message addressed to a mobile phone When SMS arrives, appears at the top of number. the screen When the reception completes, the Receive results Stand-by display "SMS"...

  • Page 50: Adding Phonebook Entries

    Phonebook Two types of Phonebooks are available with the Adding Phonebook Entries FOMA terminal: FOMA terminal Phonebook to be saved on the FOMA terminal and UIM Phonebook to Adding new phone number, mail be saved on the UIM. Entry items that can be saved/ address, etc.
  • Page 51 Adding Phonebook entries from redial or Deleting Phonebook Entries received calls Stand-by display Navigation Down key Stand-by display Navigation Right key M[Menu] Select the entry to delete (Redial) or Navigation Left key (Recv. "Delete" Calls) "Yes" Move the cursor to the phone number to C[Detail] M[Menu] "Add...

  • Page 52: I-Mode

    i-mode/Full Browser i-mode Displaying i-mode Site i-mode is a service that makes use of the display Stand-by display "iMenu" of the FOMA terminal supporting i-mode (i-mode "English" terminal) to enable you to use online services such as site access, Internet access, and i-mode Viewing and Operating Sites mail.
  • Page 53 Saving frequently accessed sites as M[Menu] While viewing a site bookmarks "Screen memo" "Save" "Yes" Save sites as bookmarks to display your favorite Displaying Screen memos pages quickly. Stand-by display "Screen M[Menu] While viewing a site Memo" "Bookmark" "Save" Move the cursor to a Screen memo Edit a title I [Add] Select a...
  • Page 54 Displaying web pages from bookmarks Displaying Web Pages Designed for PC Stand-by display "Full Browser" Stand-by display "Full Browser" "Bookmark" "Home" Select a folder Select a bookmark Information SSL/TLS-compatible web pages can be displayed • Switching i-mode to Full browser with Full browser.
  • Page 55 (an i-mode contract is necessary for this subscription). Stand-by display i-Channel has two types of channels: "Basic channel" provided by DOCOMO and "Okonomi (Optional) Channel" provided by IP (Information Provider). For "Basic channel", no packet communication charges apply for automatically updating information.
  • Page 56 Camera Marks (icons) displayed on shooting screens ● Viewing and Operating Shooting Screen Mode Photo-mode Movie-mode a bcdefgh b cdno Image size Image quality Super fi ne Fine Normal White balance Auto Incandescent Sunny Fluorescent Cloudy Macro Auto timer Still image shooting screen Moving picture shooting screen 3sec 10sec...

  • Page 57: Shooting Still Images

    Shooting Still Images/Moving Pictures Viewing Still Images/Moving Pictures after Shooting Shooting still images Viewing still images Stand-by display Stand-by display "Data Box" C[Take] Point the camera to a subject "My Picture" Move the cursor to C[Open] "Camera" C[Save] C[View] Move the cursor to a fi le Shooting moving pictures Information I[Mode]...
  • Page 58 Funny face shot Shooting Still Images in Various Modes When you point the camera to a subject, the Panorama shot camera recognizes a face and converts it into a funny face. Create a panoramic image from three still images captured by moving the FOMA terminal rightward. G[Face] Stand-by display M[Menu]...

  • Page 59: Playing Programs

    Music Music&Video Channel Setting Programs Music&Video Channel is a fee-based service • Stand-by display "Music" requiring a subscription. You also need to subscribe "Music & Video Ch" to i-mode and i-mode packet fl at-rate service. "Set program" In addition to the usage fee for the Music&Video •...

  • Page 60: Playing Music Data

    ® Downloading Chaku-Uta Full Viewing and Operating Music Player Screen Display a site that contains Chaku-Uta ® ® Full songs Select a Chaku-Uta Full Title (song name), song to download artist name "Save" Select a folder Jacket image/ lyrics Information Before downloading music data from websites, read the •...
  • Page 61 i-αppli α "i- ppli" is software for i-mode compatible mobile Starting i-αppli phones. Download various software from i-mode sites to use the FOMA terminal more conveniently I(for over 1 Stand-by display by updating stock price or weather information automatically, or enjoying games without second) connecting to network, etc.

  • Page 62: Data Box

    i-motion i-motion is a moving picture data with video and Playing i-motion sound. i-motion can be downloaded from i-motion sites and can be played, saved, and set as the Play moving pictures you recorded or i-motion Stand-by display or ring tone, etc. downloaded from sites or i-mode mails.

  • Page 63: Using Playlist

    I[New] Key operations on i-motion playback screen ● Enter a playlist name Operation Description C[Add] Move the cursor to a folder C[Pause/Play] Pause/play C[Open] I[Stop] Stop Check moving pictures/i-motion to save Navigation Left/ Play previous fi le/next fi le I[Done] Right key to a playlist Navigation Left...
  • Page 64 Osaifu-Keitai compatible service. Make sure to use a service that provides a backup service for important data. DOCOMO shall not be liable for any loss or alteration • Even when you are calling, connecting the FOMA •...

  • Page 65: Lifekit

    Convenient Tools Using Schedule Using Bar Code Reader Save schedules such as meetings or appointments. Scan information embedded in JAN code or QR code using the camera. Stand-by display Navigation Up key When scanning a bar code, keep the camera 10cm •...

  • Page 66: Media

    Viewing a document or subway map Using Various Convenient Tools View a document fi le saved on a microSD card or Using dictionary subway map saved on the FOMA terminal. Viewing a document Use Japanese dictionary, English-Japanese ● dictionary, and Japanese-English dictionary. Available fi...

  • Page 67: Data Management

    Also, display fi les saved from a PC to a microSD card on the FOMA terminal. it clicks (a) and L-04B supports a microSD card of up to 2GB and • lift it up in the a microSDHC card of up to 8GB (commercially direction of the available) (as of May, 2010).

  • Page 68: Removing A Microsd Card

    Lift the guide Remove the down (a), slide microSD card it to the direction of "LOCK" until it clicks (b) and fi x the microSD card Lift the guide down • Lift the guide while pressing the microSD card gently to fi x it. down completely (a) and slide it Information...
  • Page 69 Information Example: To move a camera image saved on the Make sure to use this FOMA terminal when resetting • FOMA terminal to a microSD card a microSD card. Stand-by display "Data Box" Note that all data on the microSD card is deleted •...
  • Page 70 Sending a piece of data Stand-by display "LifeKit" "MicroSD" "PIM" Set the receiving device to the infrared receiving mode • before sending data. I[Backup] Select a type of data to Example: To send a Phonebook entry copy Stand-by display Navigation Down key Enter the Terminal security code "Yes"...

  • Page 71: Connecting To A Pc

    If you use a USB HUB, the FOMA terminal may not Infrared communication starts. • work properly. "Yes" Information Infrared communication with infrared devices other • than L-04B may result in data not being received or displayed correctly on the receiving device.

  • Page 72: Troubleshooting

    (Japanese only)" at the back of this manual or a repair connected to an electric outlet or turns on or counter specifi ed by DOCOMO. cigarette lighter socket? blinks) Is the adapter connected to the FOMA •...
  • Page 73 Symptom Check Symptom Check Power If the battery pack terminal is dirty, the Becomes The FOMA terminal, battery pack, • • turns off or contact may become poor and the hot during or adapter may become hot during automatic power may be turned off. If it is dirty, operations or operations or charging, or when using i- α...
  • Page 74 Cannot talk Turn the power off and on, or remove Warranty and After-Sales Service • ("圏外" does and install battery pack or the UIM. not disappear Even when "FOMA terminal is not out • Warranty even when of service area" or "signal strength is you move, shown as ", calls may not be made or...
  • Page 75 • if malfunction is caused by the use of devices and genuine products consumables other than those specifi ed by DOCOMO. - Repair of malfunction or damage caused by Repair may not be possible in the following cases modifi cation is charged even during the warranty When a repair counter judges the cause of period.
  • Page 76 The parts generating magnetism are used in the • i-mode Fault Diagnosis site following portions of the FOMA terminal. Note that the card may become unusable if placing a magnetism- Check whether your FOMA terminal is properly sensitive object such as cash card near the FOMA sending/receiving mails, downloading images/ terminal.

  • Page 77: Before Updating Software

    Software update (downloading or rewriting) may take • For information on updating software, check time. the DOCOMO website and "お客様サポート (user You cannot make or receive calls, use communication support) in iMenu (Japanese only). "auto-update", • functions or other functions while updating software.
  • Page 78 How to update software To perform from the menu screen To start software update, select (update notice Stand-by display "Settings" icon) displayed on the Stand-by display, or "Other" "Software Update" Enter the perform from the menu screen. Terminal security code "Update"...
  • Page 79 C[OK] protect the FOMA terminal. Pattern defi nitions vary depending on the FOMA • terminal model. Therefore, DOCOMO may discontinue distribution of pattern defi nitions for models three years after the release date.
  • Page 80 Displaying scanned result ● Displaying scanned problem factors Select "Detail" on the alert level screen to display the problem factor list screen shown on the right. The screen image is an example. On the actual screen, the detected data name is displayed in the •...

  • Page 81: Introduction Of Options And Related Devices

    For details, contact a service counter such as the Earphone Plug Adapter 01 • docomo Shop. For details on optional devices, see *1 Earphone Plug Adapter 01 for External connector the related instruction manuals. terminal is required to connect to L-04B.

  • Page 82: Menu List

    Appendix Menu List Mail Setting Communication Display Items indicated by return to the default when Mail group executing "Reset settings".→P35 Auto sort ● Mail Inbox Inbox Edit MessageR Others MessageF ● i-mode Compose Message iMenu Unsent Message Bookmark Outbox Outbox Screen Memo Check New Messages Last URL...
  • Page 83 α Check New Messages Display SW info ppli Settings i-mode Setting Communication Auto start set Image&Effect set. End stand-by display i-motion setting Phonebook ● Home Add To Phonebook Certifi cates Search Phonebook Other No. Of Phonebook Full Browser Home Phonebook Settings Default mode Bookmark Create domain list...
  • Page 84 Data Box ● i-motion i-mode My Picture i-mode Camera Camera Preinstalled Decomail picture Playlists Decomail picto Data transfer Preinstalled microSD Item Search by i-mode Data transfer Melody i-mode Slide show Preinstalled microSD Data transfer Search by i-mode microSD Music i-mode Search by i-mode Playlists Kisekae Tool...
  • Page 85 Music LifeKit ● ● Music Player All songs Bar Code Reader Playlists Receive Ir Data Receive Artist Receive all Genre MicroSD Album Data update Resume play* Memory info. Music & Video Ch Program 1 Reset microSD Program 2 Data Security Connect to center Service Set program...
  • Page 86 Media Settings ● ● Muvee Studio Sounds & Vibration Select ring tone Record Message Record msg. setting Select effect tone Record msg. list Volume Document Viewer microSD Vibrator Subway map Manner mode set Dictionary Mail ring duration Game Set mute ring(sec.) Headset usage setting ●...
  • Page 87 Call/VT/Dialing Incoming call NW Services Voice mail Videophone Call waiting Call feature Call forwarding Self mode Chaku-moji Prefi x dial Nuisance call blocking Sub address setting Caller ID notifi cation Headset Caller ID request Set in-call arrival act Lock/Security Lock Arrival call act Secret mode Other...
  • Page 88 Own Number ● International Network Roaming Voice mail(Int.) Own number Call forwarding(Int.) ● Osaifu-Keitai Remote access setting(Int.) IC Card Content Caller ID request(Int.) DCMX Roaming guide(Int.) IC Card Lock Set Call barring Search By i-mode Missed call notifi cation for roaming setting(Int.) Int'l Service Guide Date &...
  • Page 89 Main Specifi cations Size Approx. 2.4 inches Phone ● 76,800 pixels Pixels (240 dots X 320 dots) Model name L-04B Type CMOS Image Approx. 132mm X Approx. pickup Size 1/5.0 inches Dimensions (H X W X D) 49mm X Approx. 11.0mm...

  • Page 90: Battery Pack

    Battery pack ● SD-Audio (Supports background playback): Model name Battery Pack L06 Approx. 500 minutes Battery type Lithium ion battery ® Chaku-Uta Full (Supports Nominal voltage 3.7V background playback): Nominal capacity 900mAh Approx. 600 minutes i-motion : Approx. 180 Maximum number of savable items on the ●...
  • Page 91 All mobile phones should be confi rmed to comply with the governmental regulation according to Radio Law before they are released. The SAR value of L-04B is 0.781W/kg. This value has been acquired by Telecom Engineering Center (TELEC) and is the maximum value of those measured under the maximum transmission power of the mobile phone in the procedure defi...
  • Page 92 Grant section at http://www.fcc.gov/oet/ea/fccid/ after search on Radio Frequency (RF) Signals FCC ID BEJL04B. For body worn operation, this phone has been tested and meets THIS MODEL PHONE MEETS THE U.S. GOVERNMENT'S the FCC RF exposure guidelines when used with an accessory REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

  • Page 93: Declaration Of Conformity

    Declaration of Conformity Important Safety Information The product “L-04B” is declared to conform with the essential AIRCRAFT requirements of European Union Directive 1999/5/EC Radio and Switch off your wireless device when boarding an aircraft or whenever Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and you are instructed to do so by airline staff.

  • Page 94: Export Administration Regulations

    "FOMA", "i-mode", "i- ppli", "WORLD CALL", "WORLD WING", • This product and its accessories may fall under "i-motion", "Deco-mail", "DCMX", "OFFICEED", "docomo STYLE the category of application of Japan Export Control α series", and "i-mode" logo and "i- ppli" logo are trademarks or Regulations ("Foreign Exchange and Foreign Trade...
  • Page 95 Adobe and Adobe Reader are either registered trademarks or - Windows XP is the abbreviation of Microsoft ® Windows ® • ® ® Professional operating system or Microsoft Windows XP Home trademarks of Adobe Systems Incorporated in the United States Edition operating system.
  • Page 96 Index Camera ........54 Download i-motion ....60 Download i- α ppli .....59 Character entry .......26 Accessories ....Cover back Character entry method ..27 Add to phonebook ....48 Character entry screen ...26 After-sales service ....72 Earpiece volume .....38 Charging .........19 Alarm ........63 Eco mode .......30 Check new messages ....46 Anonymous caller ....35 Edit phonebook .......49...
  • Page 97 i-motion ........60 Manner mode ......28 i-motion playback screen ..60 Menu list ......... 80 Panorama shot .......56 Infrared port ......5 Menu operation ....... 25 Part names and functions ..4 Insert microSD card ....65 Menu priority ......29 PIN1 code .......32 Intellectual property right ..92 Menu search ......21 PIN2 code .......32 International call .....37...
  • Page 98 Record message ....38 Services available for FOMA Turn power off ......20 Redial ........36 terminal ........40 Turning power on ....20 Reject unknown ......35 Set program ......57 Remove microSD card....66 Shoot moving picture ....55 Update pattern defi nition ..77 Reply to i-mode mail ....46 Shoot still image .....55 Use earphones ......5 Reset microSD card ....66...
  • Page 99 Charges apply for the access from overseas. * You may not be able to access the site depending on the content of * "docomo ID and password" are required for the access from a PC. your subscription. * You may not be able to access the site due to system maintenance, etc.
  • Page 100 Please confirm the phone number before you dial. For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo Shop etc. near you on the NTT DOCOMO website or the i-mode site. ▶NTT DOCOMO website http://www.nttdocomo.co.jp/english/ ▶i-mode site iMenu ⇒...
  • Page 101 AT Command List ･････････････････････････････････････････････････････････････････ About Manual for PC Connection This manual explains the items required for making data communication on the L-04B as well as how to install "L-04B 通信設定ファイル（ドライバ）(L-04B Communication Setting Files (Driver))" and "ドコモ コネクションマネージャ (DOCOMO Connection Manager)" inside the CD-ROM. Some...

  • Page 102: Data Communication

    Using an access point of DOCOMO internet connection service such as "mopera U" allows you to use high-speed communication at the maximum rate of 7.2Mbps for receiving and 384kbps for sending (based on best-eff...

  • Page 103: Before Using Data Communication

    *2 Required memory or hard disk space may vary depending on the PC system confi guration. *3 For DOCOMO Connection Manager, 10MB or more is required. *4 Required only for DOCOMO Connection Manager. *5 For DOCOMO Connection Manager, the display resolution of 1024x768 dots or higher is recommended. Continue on the next page...

  • Page 104: Flow Of Setup For Data Transmission (Obex™ Communication)

    • The FOMA terminal may not work properly with a USB HUB. Flow of Setup for Data Transmission (OBEX™ Communication) Install the L-04B communication setting fi les to use the FOMA USB Cable with Charge Function 02 (optional). Download and install the L-04B communication setting fi les •...

  • Page 105: Flow Of Setup For Data Communication

    Connect the FOMA terminal and a PC using the FOMA USB Cable with Charge Function 02 (optional)→P5 Download and install the L-04B communication setting fi les • Install them using supplied CD-ROM • Download and install from the DOCOMO web site Check after installation→P8...

  • Page 106: Connecting The Foma Terminal And A Pc

    Connecting the FOMA Terminal and a PC This section explains how to connect the FOMA terminal and a PC using the FOMA USB Cable with Charge Function 02 (optional). USB mode setting Setting the USB Mode Set the FOMA terminal's "USB mode setting" to "Communication mode". M ▶...

  • Page 107: Cautions When Installing/Uninstalling

    Cautions when Installing/Uninstalling Keep the following in mind when installing or uninstalling L-04B communication setting fi les (Driver) or DOCOMO Connection Manager. Make sure to install or uninstall the software from a user account with the administrator privileges. An error will occur if you attempt to install or uninstall them from an account without administrator privileges.

  • Page 108: Installing The L-04B Communication Setting Files (Driver)

    Installing the L-04B Communication Setting Files (Driver) The L-04B communication setting fi les need to be installed the fi rst time you connect the FOMA terminal and a PC with the FOMA USB Cable with Charge Function 02 (optional). Before installing L-04B communication setting fi les, make sure that the FOMA terminal is unplugged from a PC.

  • Page 109: Checking The Installed L-04B Communication Setting Files (Driver)

    Click the "ハードウェア (Hardware)" tab ▶ Click [デバイスマネージャ (Device Manager)]. Note • The L-04B communication setting fi les may not be installed properly. In this case, uninstall the L-04B → communication setting fi les fi rst, and install them again.
  • Page 110 Checking the device icon When the driver is installed correctly, the device icon is also installed. This section explains how to check whether the L-04B icon is displayed correctly. • The device icon function is unavailable for Windows XP and Windows Vista.

  • Page 111: Uninstalling The L-04B Communication Setting Files (Driver)

    (Driver) To uninstall the L-04B communication setting fi les, perform the following steps. Before uninstalling the L-04B communication setting fi les, make sure that the FOMA terminal is unplugged from your PC. Make sure to read "Cautions when Installing/Uninstalling" (P6) before starting the operation.

  • Page 112: Docomo Connection Manager

    USB Cable b Check for a contractual coverage and the service of your Internet service provider c If there is any connection software other than the DOCOMO Connection Manager, change the settings not to start the program automatically as needed •...
  • Page 113 When you use Mzone (public wireless LAN connection) using the DOCOMO Connection Manager, uninstall following public wireless LAN connection software. * If any of the following software is installed, the DOCOMO Connection Manager cannot establish the Mzone connection. • U public wireless LAN utility software •...

  • Page 114: Installing The Docomo Connection Manager

    CD-ROM)". Note • If MSXML6・Wireless LAN API is not on Windows XP, before installing the DOCOMO Connection Manager, it must be installed. When a confi rmation appears, press [Install] to install the MSXML6・ Wireless LAN API. After the installation is completed and the computer is restarted, the DOCOMO Connection Manager installation starts automatically.
  • Page 115 Click [次へ (Next)] Read the precautions carefully, then click [次へ (Next)] Read the license agreement of the DOCOMO Connection Manager and if you agree to the terms, select [使用許諾契約の条項に同意します (I Agree)] and click [次へ (Next)] Check a destination folder for the installation, click [次へ...

  • Page 116: Starting The Docomo Connection Manager

    ンマネージャ (DOCOMO Connection Manager)" ▶ "ドコモ コネクションマネージャ (DOCOMO Connection Manager)". For Windows XP Click "スタート (Start)" ▶ "すべてのプログラム (All programs)" ▶ "NTT DOCOMO" ▶ "ドコモ コネクション マネージャ (DOCOMO Connection Manager)" ▶ "ドコモ コネクションマネージャ (DOCOMO Connection Manager)". When starting for the fi rst time, a confi...

  • Page 117: Confi Guring A Dial-Up Network

    • Exiting the Internet browser or mail software does not terminate the connection. When you do not use the communication, terminate the connection by clicking [切断する (Terminate)] on the DOCOMO Connection Manager. Note that if Automatic Updating is set for OS...
  • Page 118 Enter a non-existing phone number (such as "0") in the "電話番号 (Phone Number)" fi eld ▶ Check that "FOMA L04B" is displayed for "接続方法 (Connection Method)" ▶ Click [OK] • If multiple modem names are displayed in the "接続 方法 (Connection Method)" fi eld, check the FOMA terminal modem name and select the proper one.
  • Page 119 To reset the show/hide caller ID setting to its default (unset) using a *DGPIR command AT*DGPIR=0 Note • When you use the DOCOMO Internet connection service "mopera U" or "mopera", the caller ID needs to be set to "通知 (Show)" Setting to show/hide caller ID using the access point number You can also show or hide your caller ID by adding 186 (show) or 184 (hide) to the access point number when you confi...
  • Page 120 Set up the dial-up network on the PC. • For setting up a connection to other than "mopera U" and "mopera", contact your ISP or network administrator. Example: To connect to the DOCOMO Internet connection service "mopera U", which is registered to <cid>=3 Setting on Windows 7 Click "...
  • Page 121 Click " スタート (Start)" ▶ "コントロールパネル (Control Panel)" ▶ "ネットワーク とインターネット (Network and Internet)" ▶ "ネットワークと共有センター (Network and Sharing Center)" Click "アダプターの設定の変更 (Change Adapter Setting)" ▶ Select the icon of the created dial-up connection ▶ Right-click and then click "プロパティ (Properties)"...
  • Page 122 Setting on Windows Vista Click " スタート (Start)" ▶ "接続先 (Connection)" Click "接続またはネットワークをセットアップします (Set up connection or network)" Select "ダイヤルアップ接続をセットアップします (Set up dial-up connection)" ▶ Click [次へ (Next)] When the modem selection screen appears, click "FOMA L04B" The modem selection screen appears only when the PC has multiple modems. Confi...
  • Page 123 Check the settings on the "全般 (General)" tab If two or more modems are connected to the PC, enable only "モデム−FOMA L04B (Modem−FOMA L04B)" in the "接続の方法 (Connection Method)" fi eld. • Disable "ダイヤル情報を使う (Use dialing information)". Click the "ネットワーク (Networking)" tab ▶...
  • Page 124 Setting on Windows XP Click "スタート (Start)" ▶ "すべてのプログラム (All programs)" ▶ "アクセサ リ (Accessories)" ▶ "通信 (Communication)" ▶ "新しい接続ウィザード (New Connection Wizard)" On the New connection wizard screen, click [次へ (Next)] Select "インターネットに接続する (Connect to the Internet)" ▶ Click [次へ (Next)] Select "接続を手動でセットアップする...
  • Page 125 Fill in the "ユーザー名 (User Name)", "パス ワード (Password)", and "パスワードの確認 入力 (Confi rm password)" fi elds ▶ Click [次へ (Next)] Enter the information provided by your ISP or network administrator. • To connect to "mopera U" or "mopera", these fi elds can be left unfi...

  • Page 126: Communicating

    →P5 When performing communication, connect the FOMA terminal you used to confi gure the settings. If a diff erent FOMA terminal is connected, the L-04B communication setting fi les may need to be reinstalled. Example: For Windows 7 Click "...
  • Page 127 Enter "ユーザー名 (User Name)" and "パ スワード (Password)"▶Click [ダイヤル (Dial)] The access point will be connected. • To connect to "mopera U" or "mopera", you can leave the "ユーザー名 (User Name)" and "パスワード (Password)" fi elds unfi lled and click [ダイヤル (Dial)]. If another ISP or dial-up connection is selected, fi...

  • Page 128: At Commands

    If the entered characters do not appear, enter ATE AT Command List The following commands can be used with the L-04B modem. The following commands can be entered but are invalid commands that will not work. - AT (input only AT)
  • Page 129 Command AT Commands Overview Parameters/Descriptions Examples AT&D<n> Set the operation n=0 : Ignore ER signals AT&D2 performed when a circuit (Always regard as ON). ER signal received from n=2 : When ER signals DTE is switched from are turned off by ON to OFF.
  • Page 130 Command AT Commands Overview Parameters/Descriptions Examples AT+CBC Display the battery level Result format: AT+CBC of the FOMA terminal. ＋CBC:<bcs>,<bcl> +CBC:0,70 bcs=0 : Power is supplied from the battery pack bcs=1 : Power is not supplied from the battery pack bcs=2 : The battery pack is not connected to the FOMA terminal bcs=3 : A call cannot be...
  • Page 131 Command AT Commands Overview Parameters/Descriptions Examples AT+CMEE=<n> Set whether there is an n=0 : Use the normal ERROR AT+CMEE=0 error report format of result (default). the FOMA terminal. n=1 : Use +CME ERROR:<err> result code, and use AT+CPIN="123 a numerical value for 45678","1234"...
  • Page 132 Command AT Commands Overview Parameters/Descriptions Examples AT+CPUC="<curr Rewrite the currency passwd : PIN2 code ("1234" is entered ency>","<ppu>"[," table on the UIM. for the PIN2 code) <Passwd>"] * If a wrong PIN2 code is AT+CPUC entered, "ERROR" appears. ="YEN","0.2","12 34" AT+CPUC? : Display the current setting AT+CPUC?
  • Page 133 ATE1 echo back for DTE in the n=1 : Echo back (default) command mode. ATI<n> Display the confi rmation n=0 : Display "NTT DoCoMo". ATI0 code. n=1 : Display the product NTT DoCoMo name. n=2 : Display the version of ATI1 the FOMA terminal.
  • Page 134 Command AT Commands Overview Parameters/Descriptions Examples ATQ<n> Set whether to display n=0 : Show (default) ATQ0 the result code for DTE. n=1 : Hide ATQ1 ("OK" is not displayed at this time) ATS3=<n> Set the carriage return n=13 : Default value (only "13" ATS3=13 character.
  • Page 135 Supplementary Explanation of AT Commands b Command name : +CGDCONT=[Parameter] Overview Set access point (APN) for sending packets. This is a setting command, however, it is not reset by &F. Format +CGDCONT=[<cid>[,"<PDP type>" [,"<APN>"]]] Parameter descriptions <cid> : 1 to 11 <PDP type>...
  • Page 136 : Set the specifi ed <cid> as default. List of Error Reports Numeric display Text display Reason SIM wrong A SIM other than a UIM (non-NTT DOCOMO IC card) is inserted. incorrect password The password is incorrect. unknown There is an unknown error.
  • Page 137 Result Codes b List of result codes Numeric display Text display Description Performed properly. CONNECT Connected to the other party. RING Receiving a call. NO CARRER Line disconnected. ERROR Unable to accept a command. NO DIALTONE Unable to detect dial tones. BUSY Detecting busy tones.
  • Page 138 Kuten Code List for...

  • Page 139: Kuten Code List

    Kuten Code List • The kuten codes in the following table may differ from the appearances of the actual display. Kuten Kuten Kuten 4th digit Kuten Kuten 4th digit Kuten 4th digit 1 to 3 0 1 2 3 4 5 6 7 8 9 1 to 3 0 1 2 3 4 5 6 7 8 9 1 to 3...
  • Page 140 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 さ 繊 羨 腺 舛 船 薦 詮 賎 践 ぬ∼の 些 選 遷 銭 銑 閃 鮮 前 善 漸 然 濡...
  • Page 141 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 孟...
  • Page 142 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 皖...

Table of Contents