Audio - Siemens Ay User Manual

User Manual for AyAlarm
V2.1
•
APN
•
DNS
•
NET username
•
NET password
•
AyServer URL
This information can not be changed via AyTerminal.
If the information is not fitting in one screen (one screen has 20 lines in standard and also jumbo
mode) then the text is split in more message boxes. Going from one message box to another is
possible by pressing the OK button.

5.8.4Audio

The "Audio" menu provides the user to set the AyTerminal audio settings.
Using the "Headset" item the user activates or deactivates the connected headset.
The user has the possibility to set up the volume for
•
alarm siren
•
button clicks
•
voice calls
•
ring tone
or to
•
mute all sound feedback
The volume can be defined in 5 steps where the first step always means mute (0%, 20%, 40%,
60%, 80% and 100%). By default volume settings for call, siren and ring tone are set to 100% and
for button to 40%.
If the user activates the "Mute all" item, all sound feedback is muted, but the set values are still
stored on the AyTerminal.
For ring tones there is a submenu where the user can additionally choose the ring tone. "Ring tone
3" is set by default.
Audio
Mute all
Call
Button
Siren
Audio
Mute all
Call
Button
Bootloader: 1r15
MainFW: 1r28
MSISDN:
+1234567890
APN:
Figure 5-71 Info message – standard and jumbo mode
Audio
Ring tone
Headset
Mute all
Call
Figure 5-72 Audio menu – standard mode
Audio
Siren
Ring tone
Figure 5-73 Audio menu – jumbo mode
MSISDN:
+12345678
90
APN:
Headset
AyAlarm application
Call
vol.:
25
Call
vol.:
25
AyTerminal