Siemens Ay User Manual page 47

User Manual for AyAlarm
V2.1
Selected language
Display – jumbo mode
For AyAlarm mode related settings see Table 5-5 AyAlarm mode specific settings and Table 5-
4 AyAlarm – settings available for all modes.
5.8.3.2 Firmware Update
In the "Firmware" menu the version of the current firmware is displayed. If registered to the
AyServer the firmware update can be initiated. The AyTerminal will contact the AyServer and if a
newer firmware is found on the AyServer then the AyTerminal informs the user that there is a new
version available. The info is more a request for confirmation. To accept or reject the download of
the new firmware the right/ left button must be pressed. If the right button is pressed then the new
version of the firmware is downloaded on the AyTerminal and a positive acknowledgment. is
sounded. During the download a message screen is shown.
Before AyTerminal reboots a notifying message box is shown. If the left button is pressed in
confirmation screen then the firmware update is canceled and negative acknowledgment. is
sounded.
New FW available.
Confirm update.
Figure 5-68 Firmware update menu and messages– standard mode
New FW
avaible.
Confirm
Figure 5-69 Firmware update menu and messages – jumbo mode
In case of error following message box is shown and after enter/ back button is pressed the
Firmware menu is displayed.
5.8.3.3Info
In the "Info" menu the user can see all the relevant information of the AyTerminal.
•
firmware related data like current BootLoader and MainFW
•
MSISDN
•
IMEI
•
SMS Center
Table 5-7 AyTerminal settings – default values
Downloading
Downloading
FW 29
Failed to download
new FW from
AyServer.
Figure 5-70 Error FW download message
deactivated
...
FW 29
...
Failed to
download
new FW
from
AyAlarm application
EN
FW downloaded
successfully from
AyServer.
Rebooting!
FW
downloaded
successfully
from
AyTerminal