Siemens Ay User Manual page 40

User Manual for AyAlarm
V2.1
The overview screen contains the following data:
•
List of active triggers. For each trigger the threshold value and the operator (>, <) will be
displayed.
•
Activation delay in seconds
•
List of active notifiers. If a phone number for SMS or Voice Call is defined the phone
number will be displayed in brackets also.
•
Alarm duration in seconds
In case of the "Alarm Clock" mode the "Triggers" item is replaced by "<alarm time>" menu item;
therefore the Overview screen contains following data:
•
Current time/ The set alarm time
•
List of active notifiers. If a phone number for SMS or Voice Call is defined the phone
number will be displayed in brackets also.
•
Alarm duration in seconds
Example of displayed data in case of Alarm clock menu with Siren and AyServer as notifiers active
and with defined time:
"Alarm clock
Current 19:54
Timer 21:30
Notifiers: Siren, AyServer
Duration: 00:00:30".
The text will be wrapped and the user will be able to see screen's content by scrolling it using the
up and down navigation buttons.
In case of the "Voice Call" mode, the "Triggers" item is replaced by the "Phone number" menu item;
therefore the Overview screen contains different data:
•
The set phone number where the voice call will be made
•
List of active notifiers. If a phone number for SMS or Voice Call is defined the phone
number will be displayed in brackets also.
Using the left button the previous screen is displayed (Mode menu).
If the information is not fitting in one screen (one screen has 20 lines in standard and also jumbo
mode) then the text is split in more message boxes. Going from one message box to another is
possible by pressing the OK button.
Alarm clock
Current 19:54
Timer 20:54
Notifiers:
Alarm clo
ck
Current
19:54
Figure 5-49 Overview screen for Alarm Clock mode
Duration:
01:00
19:54
Timer
20:54
Notifiers:
AyTerminal
AyAlarm application