Startup - Graco PR70 Operation & Maintenance Manual

Startup

Startup
1. Locate power switch (107) at rear of machine and
turn power on. The display module will automatically
turn on and begin to load.
2. Slide the system air pressure relief switch (106) up.
It is the yellow tab at the left, rear of the machine.
The hole in the tab should not be showing.
3. If the machine is in Disabled Mode, press the Select
Operating Mode button (
Disabled mode and to select a new operating mode.
Press the Enter button (
operating mode.
F . 9: Disabled Mode
IG
22
) repeatedly to exit
) to accept the new
312759W