Debug Utility - IBM 8275 User Manual

Figure 47. Reset Passwords to Factory Defaults

Debug Utility

Select the Debug Menufrom the System Utilities Menu panel.
Note: Using the Debug function may alter the state of the 8275-416 and cause
You are prompted to indicate if want to continue (Y=yes or N=no). If you press "Y",
the debug command line interface is used.
Debug utility is only valid via the EIA-232 interface; it does not work via Web or
telnet.
unexpected results. The intended for use of this Debug function is for trained
personel only.
Chapter 4. Using the Terminal Interface
59