Figure 26. Ping
You must supply this information:
IP Address:
Ping Count:
Command:
ARP Cache
Select Management Menu from the Main Menu. Then, select ARP Cache Menu
from the Management Menu to displays the ARP cache for the 8275-416 .
This is used to check connectivity between the 8275-416 and other devices. The
ARP cache identifies the MAC address of the IP stations communicating with the
8275-416 . SeeFigure 27 on page 41 for ARP Cache information.
40
8275-416 User's Guide
The IP address of the target station. The value is 4 decimal bytes ranging
from 0 to 255. The default is 0.0.0.0.
You can select one of these values; the default value is single:
v Single — one ping is sent to target station.
v Multiple — three pings are sent to the target station.
v Continuous — a ping is sent every second.
Send is the only command. To stop sending pings, press F3 (PREV MENU)
or select the Main Menu when sending continuous pings.