Installing The Drive; Installing The Drive Vertically, Frames R1 - ABB ACS580-01 Hardware Manual

Installing the drive


Installing the drive vertically, frames
The figures show frame R3 as an example.
1. Mark the hole locations using the mounting template included in the package. Do
not leave the mounting template under the drive. The drive dimensions and hole
locations are also shown in the drawings in chapter
203.
2. Drill the mounting holes.
3. Insert anchors or plugs into the holes and start the screws or bolts into the
anchors or plugs.
Use a sufficient number of screws or bolts and drive them long enough into the
wall to make them carry the weight of the drive.
a
1
a
b
Weight
IP21 (UL Type1)
Weight
IP55 (UL Type12)
2
×4
×4
R1
mm in mm
98 3.86 98
317 12.48 417
kg lb kg
4.8 10.59 6.5
kg lb kg
5.1 11.25 6.7
Mechanical installation 57
R1...R4
Dimension drawings
R3...R4: M6 3
R2 R3
in mm
3.86 160 6.30
16.42 473 18.62
lb kg
14.33 11.80 26.02
lb kg
14.80 13.00 28.67
on page
×4
R4
in mm in
160 6.30
619 24.37
lb kg lb
19 41.90
lb kg lb
20 44.10