Huawei H60-L04 Simplified Maintenance Manual page 73

H60-L04 Simplified Maintenance Manual
No. Task Step Content
Testing
34 the SIM 34
card
Test
35 35
result
11.3.5 MT
Insert a 3G SIM card into the phone, power on the phone, place the phone into the shielding
box, and run the test software. Before the test, select the 2G and 3G bands. If the test fails, the
RF metric of the phone is nonconforming, and the RF components may be faulty.
Issue 1.0 (2014-09-04)
Test Method and Description
The phone automatically checks for the SIM card. If
the phone passes the test, press the volume down key
to proceed to the next test item. If no SIM card is
detected, an error message is displayed No SIM card
available.
After all MMI test items are complete and the screen
displays the desired result, touch Confirm. The phone
will restarts and displays the startup screen. Press the
power key to power off the phone, remove the SIM
card and the SD card, and place them into a holder.
The mobile phone is then transferred to the next
station.
If any items failed the tests, the failed test items will
be displayed. Fill a defective product identification
card and place the defect product in the area where
defective products are stored.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Quality Inspection Procedure and Methods
68