H60-L04 Simplified Maintenance Manual
Figure 10-7 Troubleshooting weak current power-on failures
Is the issue
addressed after
the phone software is
upgraded?
Replace the PCBA
Troubleshooting process for excessive current power-on failures: Replace the PCBA
directly.
10.2 Restarts and Screen Freezing
Symptom
After you press and hold the power key, the phone repeatedly restarts and cannot display
the Home screen.
After you press and hold the power key, the phone freezes at the Huawei logo screen and
cannot display the Home screen.
Solution
Check the power-on current of the phone. If the current is between 80–350 mA, forcibly
upgrade the phone. If the current exceeds 500 mA, replace the PCBA.
Issue 1.0 (2014-09-04)
Weak
current
power-on
failure
Y
forcibly
N
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Troubleshooting
End
43