Huawei H60-L04 Simplified Maintenance Manual page 34

Hide thumbs Also See for H60-L04:

Table of Contents

Enlarged version

H60-L04 Simplified Maintenance Manual

4. Connect the side-key FPC.

Insert the auxiliary PET plate into the corresponding

position of the front cover and slantly insert in the

side-key FPC. Ensure that the FPC stiffening power is

lower than that of the plastic support ribs. Press and

hold the side-key FPC, and pull out the PET plate.

Finally, check the hand feel of the key.

5. Install the speaker. Remove the release film from the

speaker area, install the speaker with a vacuum sucking

pen, and then remove the release film from the speaker

sealing foam.

Note: The speaker pins should face outwards.

6. Install the main board to the front cover.

Press the top of the main board into its latches, place

down the main board, and then push the USB interface

at the bottom of the main board to its installation

position (aligning the main board's positioning holes

with the positioning rods on the front cover). Fasten the

front camera properly. Fasten the side-key FPC BTB

and LCM FPC BTB.

Note: When installing the main

board, prevent the side key and

LCM FPC from being pressed.

Issue 1.0 (2014-09-04)

Huawei Proprietary and Confidential

8 Assembly Procedure

Table of Contents

Troubleshooting