Unit Connectors - Axis 210 Installation Manual

Page 14 AXIS 210/210A/211/211A Installation Guide

Unit connectors

Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using
Shielded Twisted Pair (STP) cables is recommended.
Power connector - Mini DC connector. 7-20V DC, max 5W.
Audio in - 3.5mm input for a mono microphone, or a line-in mono signal (left channel is
used from a stereo signal).
Audio out - Audio output (line level) that can be connected to a public address (PA) system
or an active speaker with a built-in amplifier. A pair of headphones can also be attached. A
stereo connector must be used for the audio out.