FTE Maximal MODIG AIR User Manual page 15

•
Device name: The name of the modulator can be changed by user in this option. This is useful for identifying the
modulators easily in the scanning screen. Click on the name to access to the keyboard. Write the new name and
press the "APPLY" button to save it. When the change is made, the message "SUCCESS" will appear on screen.
•
Device update: With this menu selection you may update the connected MODIG
AIR's firmware. An internet connection is needed for this feature. The procedure is
fully automatic.
The line "On device" shows the current firmware version. The line "Available" shows
the last version. If is higher you can download and install in your phone or tablet.
Tap on the "UPDATE" button in order to upgrade the firmware.
•
App settings: In this option you can set up the following parameters:
o
Language: display language. Select between Automatic, English, Spanish, French or Italian.
o
"Apply" button time: allows configuring the delay after applying settings. It can be set from 1 to 5 seconds.
o
Sort devices by signal strenght. If you enable this option, in the scanning screen on the top of the list you
will see always the closest device to your phone or tablet.
App settings
Reserved for technical modifications and/or errors
User's manual · MODIG AIR
Language
14
- -
"Apply" button time
MODIG AIR Version en_1.1 FTE maximal