Connecting Mains Power To The Alertmaxx2 - Delta Membranes AlertMaxx2 Installation & Operating Manual

9.0

Connecting mains power to the AlertMaxx2

1. Insert 2 large cable glands into the far right hand side of the AlertMaxx2 unit.
2. Using the wiring schematic (figure 1), feed the mains power cable through the relevant cable gland
and connect the power cable to the corresponding terminal block on the main PCB (figure 2).
Ensure mains power is isolated before connecting and wiring to the AlertMaxx2 unit.
For ease of installation, each gland is located directly opposite its relevant terminal block.
WARNING!
PLEASE NOTE
Follow the internal sticker for wiring guidance.
AlertMaxx2
Figure 2. Connecting mains power
7