Power Console Connections; Voltage Selector Switch - ESAB Precision Plasmarc IEFC-S PT-24 Installation, Operation And Maintenance Manual

SECTION 3

3.11 Power Console Connections

3.12 Voltage Selector Switch

3-9
Power Supply Bundle
Input Power Strain
Relief
Cooling Water In/Out
PT-24 Precision Plasma with IEFC-S Consoles
2. Connect power and coolant lines in Power
Supply Bundle from power console to ignition
console. Power bundle consists of #6 and # 7
coolant lines (with 5/8-18 L.H. fittings), power
cable (#3 AWG) and yellow pilot arc cable (#16
AWG). Coolant lines are stamped with a 6 or 7
on the fitting to assist in identification.
Voltage selector switch inside the gas console is
preset for IEFC-S input voltage of 115 V / 60 Hz
applications. An alternate setting accommodates
Voltage
230 V / 50 Hz IEFC-S input voltage.
Selector
Switch
INSTALLATION