Fluke 281 User Manual page 312

291, 292, 294
Users Manual
* IDN?
* IST?
* OPC
* OPC?
* PRE <nrf>
* PRE?
* SRE <nrf>
* SRE?
STB?
*
* WAI
* TST?
EER?
QER?
17-20
Returns the instrument identification. The exact
response is determined by the instrument
configuration and is of the form <NAME>,
<model>, 0, <version><rmt>where
<NAME> is the manufacturer's name,
<MODEL> defines the type of instrument and
<VERSION> is the revision level of the
software installed.
Returns ist local message as defined by IEEE
Std. 488.2. The syntax of the response is
0<rmt>, if the local message is false or
1<rmt>, if the local message is true.
Sets the Operation Complete bit (bit 0) in the
Standard Event Status Register. This will
happen immediately the command is executed
because of the sequential nature of all
operations.
Query operation complete status. The syntax of
the response is 1<rmt>. The response will be
available immediately the command is executed
because of the sequential nature of all
operations.
Set the Parallel Poll Enable Register to the value
<nrf>.
Returns the value in the Parallel Poll Enable
Register in <nr1> numeric format. The
syntax of the response is <nr1><rmt>.
Set the Service Request Enable Register to
<nrf>.
Returns the value of the Service Request Enable
Register in <nr1> numeric format. The
Syntax of the response is <nr1><rmt>.
Returns the value of the Status Byte Register in
<nr1> numeric format. The syntax of the
response is <nr1><rmt>.
Wait for operation complete true. As all
commands are completely executed before the
next is started this command takes no additional
action.
The generator has no self-test capability and the
response is always 0<rmt>.
Query and clear execution error number register.
The response format is nr1<rmt>.
Query and clear query the error number register.
The response format is nr1<rmt>.