Vhto100 To Z•600 Connections (No Pz6 Or Pz600); Using The Z•600'S Internal Power Supply - Elan VHTO100 Manual

VHTO100
INSTALLATION MANUAL
VHTO100 to Z•600 Communications Controller
Connections
Connect speaker cables from the ELAN system amp to the AMP terminals on the
VHTO100 and connect the rear channel speaker outputs from the local amplifier to
the SSP terminals on the VHTO100 as shown below. Tie together the Wh/Orange and
Wh/Brown conductors from the Z•600's Control Output Jack as shown. Connect the
Control Output Jack's Green conductor to VC- of the VHTO100 and connect Brown to
VC+. See the Z•600 Installation Manual for specific details regarding Override con-
nections and functionality.
AMP OR
System Amplifier
Using the Z•600's Internal Power Supply
Use the current draw specifications below to determine the maximum number of
VHTO100s and/or Volume Controls w/Override that can be connected to the Z•600's
internal power supply.
Z•600 INTERNAL POWER
SUPPLY MAXIMUM LOAD
VHTO100 CURRENT DRAW
ELAN VOLUME CONTROLS
W/ OVERRIDE CURRENT DRAW
Page 4
(No PZ6 or PZ600)
SPEAKERS
Rear Surround Speakers
Blue
Wh/Blue
Orange
Wh/Orange
Green
Wh/Green
Brown
Wh/Brown
© ELAN Home Systems 2004 • All rights reserved.
E L A N H O M E S Y S T E M S
SSP
Local Amplifier (SSP)
Z•600
CONTROL
OUTPUT
250mA
90mA
45mA
Rear Channel
Speaker Outputs