Oil Cooler - Install (A.12.A.32 - F.10.A.15); 435, 445, 445Ct - Case 435 Repair Manual

DISTRIBUTION SYSTEMS - SECONDARY HYDRAULIC POWER SYSTEM

Oil cooler - Install (A.12.A.32 - F.10.A.15)

435, 445, 445CT

1. Install the second auxiliary oil cooler into the
mounting location.
2. Install and tighten the mounting bolts in the oil
cooler mounting bracket.
3. Start the vacuum pump. Reservoir - Apply
vacuum (A.10.A.22 - F.35.A.50)
4. Remove the caps from the fittings and plugs from
the hoses.
5. Install the hydraulic lines onto the oil cooler and
tighten the fittings.
6. Stop the vacuum pump.
7. Remove the vacuum pump from the reservoir.
8. Start and run the engine at low idle for 2 to 5 minutes
and check for any leaks.
9. Check the oil level in the hydraulic reservoir and
add oil as required. Reservoir - Filling (A.10.A.22 -
F.60.A.10)
1 04/05/2005
A.12.A / 16
1
bd04c086
2
bd04c087