Graco Pro 270GS Operation page 11

Startup
1. Place suction tube and drain tube in grounded metal
pail partially filled with flushing fluid. Attach ground
wire to pail and to earth ground.
PAINT
ti5955a
2. Turn prime valve down. Turn pressure control
clockwise to lowest pressure.
3. Set pump switch OFF.
4. Start engine.
a. Move fuel valve to open.
3A2818A
FLUSH
ti5789a
ti5971a
ti5248a
b. Move choke to closed.
c. Set throttle to fast.
ti5250a
d. Set engine switch to ON.
e. Pull starter rope.
f. After engine starts, move choke to open.
g. Set throttle to desired setting.
Startup
ti5249a
ti5263a
ti5264a
ti5251a
11