Terms used in this manual
The terms used in this manual are used as the following meanings.
This part describes only the terms frequently used.
This manual is intended for those who are familiar with the basic operations of Windows, so it
does not explain computer terms ("folder," "application," etc.). For information about those terms,
refer to the commercially available glossary.
Machine
Line
Indicates the production line that actually produces boards. The line on PT indicates the
production line that consists of only the PT-support machines.
Virtual line
While the line is an actual production line, the virtual line is the line that users can set by
themselves. You can simulate the production tact in changing and introducing the line, create the
production data for another plant's line, and the like.
Module
PT defines that the module is the one composed of the coupled modular placement machines.
You can manage and create data for each module.
Modular machine (Modular-type, Modular-support)
Indicates the machine that can be managed as module after coupled.
Machine
Indicates the production machine body.
Example of line configuration
9Q4C-017E
Line
Page 4
Module
Line
9R4C-E-PMB00-A04-01