VIVOTEK - Built with Reliability
6
Initial Configuration - via a Web Console (Optional)
IMPORTANT:
If you already configured the system using an Ethernet web console, please skip the Auto Setup
You may accidentally format your storage
steps when you connect the HDMI cable.
volumes!
1. Connec the power cord to start the NVR. Wait for the system status LED to light green.
2. From a management computer, download and execute the Shepherd utility software. Follow
the onscreen instructions to complete the installation.
3. Start the Shepherd utility. The Shepherd utility will discover the NVR located in the same
subnet.
IB8360-W
192.168.4.151
00-02-D1-73-02-02
ND8212W
0002D1730202
User's Manual - 25