IMPORTANT:
Except in the initial setup, changing system time can produce disruptions to the existing
recordings. Turning the current system time back to a time when video recording was taking
place can generate duplicate files. And those files may not be playable.
3. The system will then start to scan the local subnet for connected cameras.
4. All cameras detected on the network will be automatically selected. If necessary, deselect the
cameras you want to exclude from the configuration. Click Continue to proceed.
Cameras properly installed in the same subnet should all be listed. If you cannot find a
camera, examine its network connections.
VIVOTEK - Built with Reliability
User's Manual - 17