5
Initial Configuration - Wireless Connection (ND8212W)
1. Press the WPS button on wireless camera for 3 to 5 seconds. Refer to VIVOTEK cameras'
Installation Guide for wireless connection details.
2. Press the WPS button on the NVR for less than 10 seconds. Wait for the system status LED
to change to green.
WPS
< 10 sec
3. Open the system Settings > Camera Management page. When successfully connected, the
wireless camera will be listed. If the camera is accessed for the first time, you should enter a
new password to access the camera.
VIVOTEK - Built with Reliability
3~5 sec
root
New password
User's Manual - 23