Step 17: Roof Assembly
You will need for this page:
JS
(QTY: 32)
FASTEN TO RIDGE CAP (NEXT TWO PAGES)
FASTEN TO ROOF BEAMS WITH SCREWS
FASTEN TO NEXT PANEL WITH BOLT AND NUT
DO NOT FASTEN AT THIS TIME
3
Attach Panels #5 - #8 according to the diagram on page 36.
Weather stripping tape should be applied in one
continuous strip along the length of the roof.
JB
(QTY: 4)
7743
2
7571
7743
Roof Panel
Roof Panel
1
Begin Weather Stripping the roof ridge.
Apply more of the weather stripping after each
additional Panel is installed.
2
Attach Panels #5 - #8 in the order given in the
diagram on page 36. Use the diagram to the left
while assembling the roof.
Do not fasten the holes on the lower end of the
3
Panels. Do not install Panels #9 or #10 yet.
Double check that Panels are installed in the
correct position. The part numbers listed in the
Roof Panel Placement diagram on page 36
must match the numbers inked on the Panels.
7571
1
38
2
1
67545
Weather
Stripping
7571
7743
38W
2