Advertisement
Step 8: Floor Assembly
You will need for this page:
SS
(QTY: 8)
Do NOT fasten your Floor Frames to your Base at this time.
You will anchor your building after it is erected. If using a
Floor Frame Kit, you must wait until after assembly to install it.
1
Assemble the four (4) corners of the
Floor Frame using two (2) Sand
Screws at each corner as shown.
The Floor Frame must be BOTH square AND
level or the holes will not line up properly.
The remainder of the building assembly requires many hours and more than
one person. Do not continue beyond this point if you do not have enough
time to complete the assembly today. A partially assembled building can be severely
damaged by light winds.
Assemblies from Step 1:
•
Front/Rear Floor Frame Assemblies (2)
•
Side Floor Frame Assemblies (2)
Front
6
24
Overlap Floor Frames as shown. Set Floor Frame
with large holes on top at each corner.
When diagonal measurements
are equal, the Frame is square.
24W
Advertisement
