Step 10: Wall Framing
You will need for this page:
JS
(QTY: 8)
1
• Use two (2) Java Screws to do each of the following:
• Install one Side Wall Angle Assembly fi rst.
• Install the Rear Wall Angle Assembly second, sliding the end under the Side Wall Angle Assembly.
• Install the other Side Wall Angle Assembly third.
• Install the Header Assembly last, sliding each end under the Side Wall Angle Assemblies.
Wall Angles must face inside the building.
Side Wall Angle Assembly
Assemblies from Step 2 and Step 3:
•
Rear Wall Angle Assembly (1)
•
Side Wall Angle Assemblies (2)
•
Header Assembly (1)
ATTACH FRAMES TO INSIDE OF WALL PANELS
Header Assembly
Rear Wall Angle Assembly
Side Wall Angle Assembly
Header slides under Side Wall Angle Assembly
26
26W