Factory Setting Of The Cu240B-2 Interfaces - Siemens CU240E-2 Operating Instructions Manual

3.4

Factory setting of the CU240B-2 interfaces

The factory setting of the terminals depends on which fieldbus the Control Unit supports.
Control Units with PROFIBUS interface
The function of the fieldbus interface and digital inputs DI 0, DI 1 depends on DI 3.
--- No function.
DO 0: p0730
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Figure 3-3 Factory setting of the CU240B-2 DP Control Unit
CU240B-2 and CU240E-2 Control Units
Compact Operating Instructions, 01/2017, A5E39910322B AA
AO 0: p0771[0]
3.4 Factory setting of the CU240B-2 interfaces
DI x: r0722.x
Installing
13