Oil Pump - MOTO GUZZI 1200 SPORT 4V ABS Service Station Manual

1200 SPORT 4V ABS
1. Oil radiator
2. Oil delivery pipe to heads
3. Oil delivery pipe to radiator
4. Oil pump body
5. Oil pump gasket
6. Rotor for lubrication
7. Rotor for cooling
8. Rotor control shaft
9. Oil pump cover
10.Oil pump control gear
11.Lubrication oil intake filter
12.Cooling oil intake filter
The oil pump is operated by the gear (10) which receives the motion directly from the crankshaft. The
gear (10) is mounted on the shaft (8), on which two rotors are fitted: one for engine cooling (7) and
another for lubrication (6).
Cooling:
The rotor (7) takes in oil from the sump through the filter (12); the oil is sent to the radiator (1) through
the hoses (3). Oil passes through the radiator (1) dispersing part of the heat and reaches the heads
through the hoses (2). Oil goes down to the sump again and joins the oil used for lubrication.
Lubrication:
The rotor (6) takes in oil from the sump through the filter (11); the oil is sent through special ducts in
the crankcase to all the parts to be lubricated. Oil goes down to the sump again and joins the oil used
for cooling.

Oil pump

Removing
OPTION 01
•
Drain the engine oil.
•
Remove the generator and the timing
system cover.
•
Unscrew and remove the nipple.
•
Collect the gasket.
Engine
ENG - 169