Accessories And Replacement Parts - Vega VEGAMIP R61 Operating Instructions Manual

3 Product description
Storage and transport
temperature
Protective cap
Flanges
Electronics module
Mounting adapter
10
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 ... 85 %
3.4

Accessories and replacement parts

The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
You will find additional information in the supplementary instructions
manual "Protective cover" (Document-ID 34296).
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ANSI B 16.5,
JIS B 2210-1984, GOST 12821-80.
You can find additional information in the supplementary instructions
manual "Flanges according to DIN-EN-ASME-JIS" (Document-ID
31088).
The electronics module VEGAMIP R61 is a replacement part for
microwave barriers of VEGAMIP series 60.
You will find additional information in the following operating instruc-
tions manual:
•
"Electronics module VEGAMIP R61 (receiving unit)" (Document-ID
36428)
With high process temperatures exceeding 80 °C, you have to use a
mounting adapter for the emitting and the receiving unit. The mount-
ing adapter can only be used with the threaded version (internal horn
antenna with PTFE cover).
Fig. 3: VEGAMIP 61 with high temperature mounting adapter
VEGAMIP R61 • Receiving unit