Related Circuit Breaker References; Figure 2-2: Lift Truck - GE SecoGear Application Manual

SecoGear Medium-voltage Switchgear Application and Technical Guide
Circuit Breaker Selection

Figure 2-2: Lift Truck

14
Any housekeeping pad placed under the switchgear, must
be less than 4 in. tall for proper operation of the lift truck.
For maximum safety and ease of use, the lift truck will be
locked to the switchgear when a device is being handled,
either inserted or removed. The lift truck should be used to
carry only SecoVac circuit breakers, roll-out transformer
trays, and fuse rollouts. Using the lift truck for any other
application may result in damage to the carriage or injury
to personnel.
The lift truck requires a winch handle to raise or lower the
carriage, and it will hold its position thanks to a clutch-
break within the winch.

RELATED CIRCUIT BREAKER REFERENCES

1. IEEE Standard C37.06, Schedules of Preferred Ratings
and Related Required Capabilities for AC High Voltage
Circuit Breakers Rated on a Symmetrical Current Basis.
2. IEEE Standard C37.010-2005, Application Guide for AC
High Voltage Circuit Breakers.
3. IEEE Standard C37.04, Circuit Breaker Rating Structure.
4. IEEE Standard C37.20.2-2005, Metal-Clad Switchgear
Assemblies.
5. IEEE Standard C37.100-2001 Definitions for Power
Switchgear.
©2017 General Electric All Rights Reserved
DET-882