Erase Memory - Extech Instruments SL400 User Manual

Noise dose meter

Table of Contents

Auto Data Recording

Press the

button to enable the auto data record function. The

symbol will flash on the

LCD display. The bottom left of the LCD display will show WRITE, at each sample interval to indicate

that the data was written to the meter's internal memory.

Erase memory

When the bottom left of the LCD displays FULL, the internal memory is full. The auto function

cannot be used until the data stored in memory is downloaded and cleared.

Note: The memory can only be downloaded and erased using the software.

Manual ‐ Single Data Point Recording

Press the

button to store the displayed reading. The

symbol will flash. The bottom left of

LCD display will show WRITE, indicating that the single data point was written to the meter's

internal memory.

Note: Single Data Point recording does not function while the meter is in Auto Data Recording

mode.

To view manually recorded data, see the heading View Logged Sound Level Readings or

View Logged DOSE readings.

SL400‐en‐GB_V1.0 2/16

GlobalTestSupply

www.

.com

nd Quality Products Online at:

sales@GlobalTestSupply.co

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the SL400 and is the answer not in the manual?