Table of Contents
Advertisement
SYSTEM REQUIREMENTS
Before installing CintiqPartner, make sure your computer meets the following system requirements:
•
PC. Windows XP, 98, Me, or 2000. Available USB port and CD-ROM drive.
•
Macintosh. OS X, v10.1.5 or greater, or OS 9. Available USB port and CD-ROM drive.
STEP 1: FIRST, INSTALL THE CINTIQ INTERACTIVE PEN DISPLAY
Referring to the directions provided in your Cintiq Installation Guide and User's Manual, fully install your
Cintiq Interactive Pen Display. Be sure to follow all instructions carefully. Failure to do so may cause
damage to Cintiq or to the video card in your computer.
Note: If you previously installed Cintiq, use the enclosed Wacom Tablet CD to upgrade your Wacom
driver to v4.76 or later. (The CD is included only when CintiqPartner is purchased separately from
the Cintiq Interactive Pen Display.) Driver updates can also be downloaded from the Wacom web
site for your region.
To upgrade the driver from the Wacom Tablet CD, insert the CD into your computer's CD-ROM
drive. The installer menu should automatically display. If the menu does not display, double-click
on the I
icon (located on the CD). Click on the I
NSTALL
to install the driver software.
When you install the Wacom tablet software from the CD, the Wacom Tablet control panel and
online Help are also installed on your system. Online Help is not installed when you update the
Wacom tablet driver from an Internet download.
STEP 2: CONNECT CINTIQPARTNER
After you have completely installed the Cintiq Interactive Pen Display, plug the CintiqPartner USB cable
into an available USB port on your computer. Then use the Cintiq pen on the CintiqPartner tablet and
verify that you can move the screen cursor.
Be sure to check the Wacom Tablet driver Read Me file for late-breaking news. If you have trouble
installing CintiqPartner, first see the Troubleshooting section in this manual. Additional information for
both CintiqPartner and the Cintiq Interactive Pen Display can be found in the online Help.
Online Help is located in the Wacom Tablet control panel under the H
Help by clicking on the H
To read the Help before installing CintiqPartner, first insert the Wacom Tablet CD into your computer's
CD-ROM drive. When the software menu appears, click on C
Open the S
folder. Then locate and open the appropriate language folder. Within the
ETUP
D
folder for your language, double-click on the C
OCUMENTATION
Acrobat Reader v3.05 or greater to view the Help file.
You might also refer to your Cintiq Installation Guide and User's Manual for additional reference
information.
NEXT STEPS
Before working with CintiqPartner:
•
First review Working with CintiqPartner on the following page.
•
Then open the Wacom Tablet control panel and review the settings.
INSTALLATION
... button (Windows) or the ? button (Macintosh).
ELP
C
button and follow the prompts
NSTALL
INTIQ
menu. You can also access
ELP
P
and then E
INTIQ
ARTNER
H
icon. You will need Adobe
INTIQ
ELP
CD.
XPLORE
INSTALLATION
Page 3
Advertisement
Table of Contents
