Appendix G - Technical Specifications - Axis 2120 User Manual

Technical Specifications
72

Appendix G - Technical Specifications

System Requirements -
and can be used with most operating systems: Windows 95, 98, NT and 2000, Linux, UNIX,
Mac and others. The only software required is Microsoft Internet Explorer 4.x, or higher
(used with Axis' ActiveX component AXIS Camera Control), or Netscape 4.x.
Physical network connection using RJ-45 twisted pair cable. Remote
Installation -
connection using any standard serial modem, or local computer connected using the a Null
Modem cable.
Management -
Image Features -
in-picture motion detection.
Image Resolution -
Networking - 10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP,
NTP, ARP and BOOTP.
I/O Connector -
(max 24V, 0.1A) that features a programmable digital input/output for remote image
storage via File Transfer Protocol (FTP) or E-mail (SMTP), pre/post alarm image storage.
Pre/Post Alarm Buffer -
Modem Connector -
Security - Multi-user password protection.
Operating Conditions: -
EMC: FCC Class A,
Approvals -
(Japan),
Safety: EN 60950, UL, CSA.
Metrics: - Height: 2.2" (5.7 cm), Width: 3.4" (8.6 cm), Length: 5.4" + lens 1.8" = 7.2"
(13.8 cm + 4.5 cm = 18.3 cm), Weight: 0.55 lb. (0.25 kg) - excluding power supply.
Hardware - ARTPEC-1 compression chip; ETRAX-100, including, 32 bit RISC, 100 MIPS
CPU,
16 Mbyte DRAM, 4 Mbytes FLASH PROM.
The AXIS 2120 uses the standard Internet TCP/IP suite of protocols
Remote configuration and status using Web-based Administration Tools.
Time/date stamp, text overlay, variable size, color CGI control, and
CIF = 352 x 288, QCIF = 176 x144, 4CIF = 704 x 576
Providing a single optical-isolated alarm input, and a single digital output
Up to 8 MByte memory available for pre/post alarm image storage.
Single 9-pin D-SUB RS232 connector, max 115 kbps, half-duplex.
Temp: 41to122
o o
F (+5 to +50 C), Humidity: 8 - 80% RHG.
:EN55024/1998, Emission: C-Tick (Australia), VCCI
AXIS 2120 User's Manual