Axis 2120 User Manual page 13

AXIS 2120 User's Manual
You will now see '
Request timed out...
Notes:
•In Windows you can find out the IP address of your workstation by running
95/98/ME) or
•See also Other IP Setup Methods, on page 59.
Connect an Ethernet cable to your AXIS 2120
and attach it to the network.
Attach the external Power Supply to
the unit and connect it to your local
mains supply.
Approximately 10-15 seconds after connecting the power sup-
ply, the message 'Reply from 172.21.1.200...' - or
similar, is returned in the Command Prompt. Ensure that the
Power Indicator is permanently lit and that the Network Indicator
flashes intermittently.
Exit ping. The installation is complete, and you are now ready to
access the AXIS 2120 from your Web browser, as described in the
next section.
(Win NT/2000) from the command line.
ipconfig
Installing Your Camera on a Network
' messages repeatedly returned in the window.
Power Indicator
(Win
winipcfg
Network Indicator
13