Refining The Dial-Up Networking Properties - Axis 2120 User Manual

AXIS 2120 User's Manual

Refining the Dial-up Networking Properties

Having created the dial-up connection for your AXIS 2120, follow the steps below to
refine the connection properties:
From the dial-up networking dialog, right-click the
dedicated dial-up connection previously created for your
camera (AxisCamera was the connection used in this and
previous examples). Select Properties.
drop-down list, select PPP as the Type
of Dial-Up Server.
In the Advanced options field, check
Enable software compression. All other
checkboxes should remain unchecked.
In the Allowed network protocols field,
check the TCP/IP checkbox. The NetBEUI and
IPX/SPX checkboxes should remain unchecked.
Click the Server Types tab. From the
Installing Your Camera to a Modem
Click TCP/IP settings and then check the
Server assigned IP address, and Server
assigned name server addresses radio buttons.
Check the Use IP header compres-
sion and Use default gateway on a
remote network checkboxes. Click OK.
Click the Scripting tag and ensure that the Start ter-
minal screen minimized checkbox is checked. Click OK
to exit Dial-Up Networking Properties.
19