Fitting The Capillary Piston - Gilson microman e User Manual

FITTING ThE CApILLARY
Make sure the capillary piston
(CP) is compatible with the
MICROMAN E model that will
be used.
CP25, CP50, and CP250 Bulk
The capillaries and pistons
are delivered in two separate
boxes. To fit a capillary piston :
1. Take care not to
damage the sealing
tip when handling
1
the piston
2. Select a piston
and slide it into the
capillary
3. Gently push the
capillary until it snaps
onto the capillary
holder.
4. Attach the stem (
by slowly pressing
the push button until
you feel and hear a
slight click and then
continue to press to
the first stop. Finally,
pipette the liquid.
NOTICE
Chapter 2
pISTON
.
3
3
.
4
2
Never lubricate the capillary holder,
capillary, or any other part of the
pipette. If the capillary tends to slip
off the capillary holder, clean the
capillary holder with ethanol, using
a medical wipe or similar soft tissue.
MICROMAN E®
CP MODEL
CP10 M10E
CP25 M25E
CP50 M50E
CP100 M100E
CP250 M250E
CP1000 M1000E
2
3
4
1
Figure 3
MICROMAN
Capillary Piston
|
USER'S GUIDE
8