Related Manuals for BK Precision 1715A
Summary of Contents for BK Precision 1715A
- Page 1 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
- Page 3 INTRODUCTION The B+K Precision Model 1715 DC Power Supply is a high quality, current rather than output voltage. Current limits are adjustable from 5% general purpose de power source. It provides 0-60 volts de output, to 100% of maximum. In constant current applications, the maximum adjustable with both coarse and fine voltage controls for precise setta...
- Page 5 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
-
Page 9: Safety Precautions
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com OPERATING INSTRUCTIONS SAFETY PRECAUTIONS Do not exceed the voltage rating of the circuit being powered. Many transistors and integrated circuits will not withstand voltage of 60 volts. Use only a polarized 3-wire ac outlet. - Page 10 OPERATING INSTRUCTIONS Equipment Equipment ing Pow Being Powered ,-- - ="""'"""' Strap Strap Grounded, common with Grounded, common with negative polarity. positive polarity. Figure 3 (A and B). Grounding Possibilities.
- Page 13 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
- Page 16 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 OPERATING INSTRUCTIONS TestEquipmentDepot.com Output voltage equals sum of both displays (in voltage metering mode) Load Figure 8. Connecting Two Power Supplies in Series.
-
Page 19: Electronics Servicing
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com APPLICATIONS GENERAL the Model 1715. The equipment being tested may contain its own power supply and operate from ac power. A de voltage may already be present The Model 1715 power supply has a very wide variety of applications in the circuit. -
Page 20: Electronics Design Lab
APPLICATIONS BATTERY CHARGING ELECTRONICS DESIGN LAB The power supply can be used as a battery charger to restore the charge The technician or engineer working in an engineering laboratory in rechargeable batteries such as lead-acid, nickel-cadmium, and some requires a de power supply to power breadboard and prototype circuits. alkaline types. - Page 22 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
- Page 25 Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com...
Need help?
Do you have a question about the 1715A and is the answer not in the manual?
Questions and answers