Advertisement
1. Turn the machine off and unplug the power cord. Wait for the machine to
cool down.
2. Using the handle, completely open the front cover.
•
Do not touch the green surface, the OPC drum or the front of
the toner cartridge, with your hands or any other material. Use
the handle on each cartridge in order to avoid touching this
area.
•
Be careful not to scratch the surface of the paper transfer belt.
•
If you leave the front cover open for more than a few minutes,
the OPC drum can be exposed to light. This will cause damage
to the OPC drum. Cover the OPC drum of the toner cartridge
with the clean paper to avoid damaging it from the light while
you clean the inside.
3. Press the green release handle to release the paper transfer belt.
Holding the handle on the paper transfer belt, lift it out of the machine.
4. Grasp the handles on the toner cartridge and pull to remove all the
cartridge from the machine one at a time.
If you open the front cover, be careful not to touch the underneath
the control panel (the lower part of the fuser unit). The temperature
of the fuser unit might be high and could damage your skin.
When you open the front cover and work inside the machine, it is
highly recommend that you remove the paper transfer belt first.
Because the work you do could contaminate the paper transfer
belt.
5. With a dry, lint-free cloth, wipe away any dust and spilled toner from the
toner cartridge area.
If toner gets on your clothing, wipe it off with a dry cloth and wash it
in cold water. Hot water sets toner into fabric.
Maintenance_ 63
Advertisement
