Advertisement
1. Open System Preferences.
2. Click Security.
3. Click the Firewall menu.
4. Turn firewall off.
The following instructions may vary for your model.
Follow the next procedure to configure IP address:
1. Connect your machine to the network with a network cable.
2. Insert the Installation CD-ROM, and open the disk window, select
MAC_Installer > MAC_Printer > SetIP > SetIPapplet.html.
3. Double click the file and Safari will automatically open, then select
Trust. The browser will open the SetIPapplet.html page that shows
the printer's name and IP address information.
4. Click on the
icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5. Enter the machine's new information into the configuration window
as follows. In a corporate intranet, you may need to have this
information assigned by a network manager before proceeding.
•
MAC Address: Find the machine's MAC address from the
Network Configuration Report and enter it without the colons. For
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•
IP Address: Enter a new IP address for your printer. For
example, if your computer's IP address is 192.168.1.150, enter
192.168.1.X. (X is number between 1 and 254 other than the
computer's address.)
•
Subnet Mask: Enter a Subnet Mask.
•
Default Gateway: Enter a Default Gateway.
6. Select Apply, then OK, and OK again. The printer will automatically
print the configuration report. Confirm that all the settings are correct.
Quit Safari. You may close and eject the installation CD-ROM. If
necessary, restart the computer's firewall. You have successfully
changed the IP address, subnet mask, and gateway.
IPv4 setting using SetIP Program (Linux)
SetIP program should be automatically installed during the printer driver
installation.
For using SetIP program, disable the computer firewall before continuing
by performing the following:
The path and UIs may differ by Linux OS version. Refer to the
Linux OS manual to turn firewall off.
1. Open System Preferences or Administrator.
2. Click the Firewall.
3. Turn firewall off.
Follow the next procedure to configure IP address:
1. Print the machine's Network Configuration Report to find your
machine's MAC address.
2. Open the /opt/Samsung/mfp/share/utils.
3. Double click the SetIPApplet.html file.
4. Click to open the TCPIP configuration window.
5. Enter the network card's MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network configuration report. Confirm all the
settings are correct.
7. Close the SetIP program.
INSTALLING NETWORK CONNECTED
MACHINE'S DRIVER
You must install the printer driver software for printing. The software
includes drivers, applications, and other user friendly programs.
Make sure that the network setup for your machine is completed. All
applications should be closed on your computer before beginning
installation.
Windows
This is recommended for most users. All components necessary for
machine operations will be installed.
Follow the steps below:
1. Make sure that the machine is connected to the network and powered
on.
2. Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appears.
•
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive. Click OK.
•
If you use Windows Vista, click Start > All programs > Accessories
> Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
•
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
•
If the AutoPlay window appears in Windows 7 and Windows 2008
Server R2, click Run Setup.exe in Install or run program field, and
click Yes in the User Account Control windows.
3. Select Install now.
If necessary, select a language from the drop-down list.
•
The Advanced Installation has two options, Custom
Installation and Install Software Only. Custom Installation
allows you to select the machine's connection and choose
individual component to install. Install Software Only allows
you to install the supplied software programs, such as Smart
Panel. Follow the instruction on the window.
•
Administrator Installation provides convenient installation
methods useful for administrators (See "Administrator's Guide
(Windows only)" on page 91).
Network setup_ 29
Advertisement
