Advertisement
Linux
ITEM
Operating
RedHat Enterprise Linux WS 4, 5 (32/64 bit)
system
Fedora Core 2~10 (32/64 bit)
SuSE Linux 9.1 (32 bit)
OpenSuSE 9.2, 9.3, 10.0, 10.1, 10.2 10.3, 11.0
11.1 (32/64 bit)
Mandrake 10.0, 10.1 (32/64 bit)
Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04 8.10 (32/64 bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64 bit)
Debian 3.1, 4.0, 5.0 (32/64 bit)
CPU
Pentium IV 2.4 GHz (IntelCore2)
RAM
512 MB (1024 MB)
Free HDD space
1 GB (2 GB)
UNIX
ITEM
Operating
Sun Solaris / SPARC
system
Sun Solaris / x86
HP-UX / PA-RISC
HP-UX / Itanium
IBM AIX / Power
Free HDD space
Up to 100 MB
INSTALLING USB CONNECTED MACHINE'S
DRIVER
A locally connected machine is a machine directly attached to your
computer using the USB cable. If your machine is attached to a network,
skip the following steps below and go on to installing network connected
machine's driver (See "Installing network connected machine's driver" on
page 29).
Only use an USB cable no longer then 3 m (10 ft.).
Windows
You can install the machine software using the typical or custom method.
The following steps below are recommended for most users who use a
machine directly connected to your computer. All components necessary for
machine operations will be installed.
1. Make sure that the machine is connected to your computer and powered
on.
If the "Found New Hardware Wizard" window appears during the
installation procedure, click
to close the window, or click Cancel.
2. Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation window
appears.
•
If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter which represents
your drive. Click OK.
•
If you use Windows Vista, Windows 7 and Windows 2008 Server R2
REQUIREMENTS
REQUIREMENTS
in the upper right corner of the box
Getting started_ 23
click Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter which represents
your drive and click OK.
•
If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
•
If the AutoPlay window appears in Windows 7 and Windows 2008
Server R2, click Run Setup.exe in Install or run program field, and
click Yes in the User Account Control windows.
3. Select Install now.
If necessary, select a language from the drop-down list.
•
The Advanced Installation has two options, Custom
Installation and Install Software Only. Custom Installation
allows you to select the machine's connection and choose
individual component to install. Install Software Only allows
you to install the supplied software programs, such as Smart
Panel. Follow the instruction on the window.
•
Administrator Installation provides convenient installation
methods useful for administrators (See "Administrator's Guide
(Windows only)" on page 91).
4. Read License Agreement, and check I accept the terms of the
License Agreement. Then, click Next.
The program searches the machine.
If your machine is not found in the network or locally, the following
Advertisement
