Advertisement
window will appear.
•
Check if you want to install the software without
connecting the printer to the network or locally.
-
Check this option to install the software without a machine
connected. In this case, the print a test page window will be
skipped.
•
Search again
-
Press this button to research connected machine.
-
When you click this button, the firewall notice window
appears;
Turn off the firewall and click Search again. For Windows
operating system, click Start > Control Panel > Windows
Firewall, and inactivate this option.
Then click Next in the Firewall Notice window.
Turn off the firewall from the third party's program beside
the operating system. Refer to the manual provided by
individual programs.
•
Direct Input
-
The Direct Input allows you to search a specific machine
on the network.
-
Search by IP address: Enter the IP address or the host
name. Then click Next.
To verify your machine's IP address, print a network
configuration report (See "Printing a machine report" on
page 62).
-
Search by network path: To find a shared machine (UNC
Path), enter the shared name manually or find a shared
printer by clicking the Browse button. Then click Next.
•
Help
-
If your machine is not connected to the computer or
network, This help button gives detailed information about
the how to connect the machine.
•
Set IP Address
-
If you want to set a specific IP address on a specific
network machine, click the Set IP Address button. The Set
IP Address window appears. Do as follows:
a) Select a machine to be set with a specific IP address from
the list.
b) Configure an IP address, subnet mask, and gateway for the
machine manually and click Apply to set the specific IP
c) Click Next.
5. When the printer connection confirmation window appears, check the
printer name and click Next.
6. After the installation is finished, a window asking you to print a test page
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and skip to step 7.
7. If the test page prints out correctly, click Yes.
If not, click No to reprint it.
8. To register as a user of the machine in order to receive information from
Samsung, click On-line Registration. You are now registered to the
Samsung web site.
9. Click Finish.
If the printer driver does not work properly, follow the steps below to
repair or reinstall the driver.
a) Make sure that the machine is connected to your computer and
powered on.
b) From the Start menu, select Programs or All Programs >
Samsung Printers > your printer driver name > Maintenance.
c) Select the option as you wish, follow the instruction on the window.
Macintosh
The software CD that came with your machine provides you with the PPD
file that allows you to use the CUPS driver or Apple LaserWriter driver (only
available when you use a machine which supports the PostScript driver) for
printing on a Macintosh computer.
1. Make sure that the machine is connected to your computer and powered
on.
2. Insert the supplied software CD into your CD-ROM drive.
3. Double-click the CD-ROM icon that appears on your Macintosh desktop.
4. Double-click the MAC_Installer folder.
5. Double-click the Installer OS X icon.
6. Enter the password and click OK.
7. The Samsung Installer window opens. Click Continue.
8. Read the license agreement and click Continue.
9. Click Agree to agree to the license agreement.
10. Select Easy Install and click Install. Easy Install is recommended for
most users. All components necessary for machine operations will be
installed.
If you select Custom Install, you can choose individual components to
install.
11. When the message which warns that all applications will close on your
computer appears, click Continue.
If a window asking you to select an installation type appears,
select Typical installation for a local printer and then click OK
12. After the installation is finished, click Quit.
13. Open the Applications folder > Utilities > Print Setup Utility.
•
For Mac OS X 10.5~10.6, open the Applications folder > System
Preferences and click Print and Fax.
14. Click Add on the Printer List.
•
For Mac OS X 10.5~10.6, click the "+" icon; a display window will pop
up.
15. For Mac OS X 10.3, select the USB tab.
•
For Mac OS X10.4, click Default Browser and find the USB
connection.
•
For Mac OS X 10.5~10.6, click Default and find the USB connection.
Getting started_ 24
address for the network machine.
Advertisement
