Sending Recalled Data Points; Sending All Stored Data And The Average Ph Value - Hach sension 4 Instruction Manual

SECTION 5,
continued

5.2.3 Sending Recalled Data Points

5.2.4 Sending All Stored Data and the Average pH Value

1. To transfer data, it must be recalled first. Press the
key while in the Reading mode. See Section 4.2 on page 42
for more information.
2. When the desired sample data is displayed, press
3. The word
PRINT
will return to Reading mode.
1. To transfer all data, it must be recalled first. Press the
key while in the Reading mode. See Section 4.2 on
RECALL
page 42 for more information.
2. When a data point is displayed, press
show
Print Sample # ?
3. Press the up arrow. The instrument will show
and with the flashing
All
•
Press to return to Reading mode without printing.
EXIT
•
Press the down arrow to return to the prompt for printing
single data points.
•
Press to print all data and the average pH of the stored
ENTER
data (data that is printed but not stored will not be included).
The word
PRINT
printed. Then the meter will return to the most recently stored
sample data. Press
arrow key to scroll to another data point.
49
will be briefly displayed, then the meter
.
. At this point the options are:
?
will be displayed until all the data has been
to return to Reading mode or an
EXIT
RECALL
.
PRINT
. The display will
PRINT
Print, Sample