Installing Your Camera on a Network
12
Approximately 10-15 seconds after connecting the power sup-
ply, the message 'Reply from 172.21.1.200...' - or
similar, is returned in the Command Prompt. Ensure that the
Power Indicator is permanently lit and that the Network Indicator
flashes intermittently.
Exit ping. The installation is complete, and you are now ready to
access the AXIS 2100 from your browser, as described in the next
section.
Connect an Ethernet cable to your AXIS 2100
and attach it to the network.
Attach the external Power Supply to
the unit and connect it to your local
mains supply.
Network Indicator
AXIS 2100 User's Guide
Power Indicator