Putting The Socket Into Operation; Tuning The Socket And The Thermostat Together - Computherm Q1RX Operating Instructions Manual

2. PUTTING THE SOCKET INTO OPERATION

Warning! Modifying the socket can cause electric shock or product
failure.
Plug the COMPUTHERM Q1RX device into a power socket near the
location of the device to be controlled. A few seconds after the LED
lights of the device flash once, the device becomes ready for operation.
After this, you can start tuning the socket and the thermostat (or the
socket, the receiver of the thermostat and the thermostat) together.
3. TUNING THE SOCKET AND THE THERMOSTAT
TOGETHER
ATTENTION! If you wish to use the COMPUTHERM Q1RX socket
in addition to the receiver unit of the thermostat, then the socket,
the receiver of the thermostat and the thermostat should be tuned
3