Setting Up The Oscilloscope To Inspect Package Contents - Agilent Technologies Infiniium User's Quick Start Manual

To inspect package contents
❏ Inspect the shipping container for damage.
Keep a damaged shipping container or cushioning material until you have
inspected the contents of the shipment for completeness and have checked the
oscilloscope mechanically and electrically.
❏ Verify that you received the following items in the Infiniium Oscilloscope
packaging.
• Infiniium Oscilloscope
• Mouse
• Touchscreen Stylus
• 10073C 10:1 10 MΩ passive probes (one for each analog channel on 8000A
series models only)
• Digital Probe Kit (MSO models only)
• Calibration Cable (80000B series models only)
• SMA to Precision BNC Adaptors (80000B series models only)
• Accessory Pouch
• Front Panel Cover
• Keyboard
• Power cord
• Probe De-skew and Performance Verification Kit (80000B series models
only)
• User's Quick Start Guide
See the following figures for your model of Infiniium Oscilloscope. (See table
1-4 for the power cord.) If anything is missing, contact your nearest Agilent
Technologies Sales Office. If the shipment was damaged, contact the carrier,
then contact the nearest Agilent Technologies Sales Office.
❏ Inspect the oscilloscope.
• If there is mechanical damage or a defect, or if the oscilloscope does not
operate properly or does not pass performance tests, notify your Agilent
Technologies Sales Office.
• If the shipping container is damaged, or the cushioning materials show signs
of stress, notify the carrier and your Agilent Technologies Sales Office. Keep
the shipping materials for the carrier's inspection. The Agilent Technologies
Sales Office will arrange for repair or replacement at Agilent's option without
waiting for claim settlement.
Setting Up the Oscilloscope
To inspect package contents
1-3