To Inspect Package Contents - Agilent Technologies 54830 Series Service Manual

To inspect package contents

Inspect the shipping container for damage.
❏
Keep a damaged shipping container or cushioning material until you have inspected the contents
of the shipment for completeness and have checked the oscilloscope mechanically and
electrically.
Verify that you received the following items in the Infiniium Oscilloscope packaging.
❏
• Infiniium Oscilloscope
• Mouse
• (4) 1165A 10:1 10 MΩ passive probes (54831 model only)
• (2) 1165A 10:1 10 MΩ passive probes (54830 model only)
• Digital Probe Kit (5483xD models only)
• Accessory Pouch
• Front Panel Cover
• Keyboard
• Power cord
• User's Quick Start Guide
See Figure 2-1. (See table 2-1 for the power cord.) If anything is missing, contact your nearest
Agilent Technologies Sales Office. If the shipment was damaged, contact the carrier, then contact
the nearest Agilent Technologies Sales Office.
Inspect the oscilloscope.
❏
• If there is mechanical damage or a defect, or if the oscilloscope does not operate properly or
does not pass performance tests, notify your Agilent Technologies Sales Office.
• If the shipping container is damaged, or the cushioning materials show signs of stress, notify
the carrier and your Agilent Technologies Sales Office. Keep the shipping materials for the
carrier's inspection. The Agilent Technologies Sales Office will arrange for repair or
replacement at Agilent's option without waiting for claim settlement.
Chapter 2: Preparing for Use

To inspect package contents

2–3