Lan Ip Address; Dhcp Server - ActionTec GT724-WG User Manual

LAN IP Address

Selecting LAN IP Address in the "Configuring the Advanced Settings" screen generates the "
Address" screen.
The values in the
"Device IP
mask of the Gateway as seen on the network. These values can be modified for your
Actiontec recommends keeping the default factory settings (
255.255.255.0).
?
Note: If the Gateway's
within the same subnet. For more information, see "
After changing settings, click Next or Back to continue, or Save and Restart to make all changes permanent.

DHCP Server

Selecting Server in the "Configuring the Advanced Settings" screen generates the "
DHCP
screen. The Gateway has a built-in
assigns a different address to each computer on the network, eliminating
IP
default setting is On. To disable the
43 Chapter 4 Using Advanced Setup
Actiontec strongly recommends leaving the
ensure the addresses of the networked computers are on the same subnet as the
IP
For more information, see "
DHCP Server Configuration
Clicking Next in the "
DHCP
Configuration" screen. Change
Beginning IP Address
The "Beginning Address" is the
IP
Actiontec recommends keeping the factory default setting (192.168.0.2).
Ending IP Address
The "Ending Address" is the
IP
Actiontec recommends keeping the factory default settings (192.168.0.254).
The beginning and ending
are left intact, the Gateway supplies a unique
computer on the network. Note that the first three groups of numbers of the addresses are identical; this
means they are on the same subnet. The
address range it generates. For instance, if the Gateway's
beginning address to 10.33.222.2, and the ending
IP
44 Actiontec 54 Mbps Wireless DSL Gateway User Manual
Lease Time
"Lease Time" is the amount of time, in seconds, the
Default is 86400 seconds (24 hours), after which a new IP address must be released. To extend the lease
time, enter a larger number.
Address" and "Device
LAN
Address is modified, ensure the
LAN IP
(Dynamic Host Configuration Protocol) server that automatically
DHCP
Server, select Off.
DHCP
Server option On. If the
DHCP
Server Configuration."
DHCP
Server" screen (if the
DHCP
address range and
IP
address at which the
IP
Address at which the
IP
addresses define the
IP
address between 192.168.0.2 and 192.168.0.254 to each
IP
address of the Gateway must be on the same subnet as the
IP
Netmask" text boxes are the
address 192.168.0.1 Subnet mask
IP
DHCP
Server Configuration."
DHCP
IP
DHCP
server is activated) generates the "
server information here.
DNS
server starts assigning
DHCP
Server stops assigning
DHCP
address range of the Gateway. If the default values
IP
address is changed to 10.33.222.1, set the
IP
address to 10.33.222.254.
IP
server will lease a particular
DHCP
LAN IP
address and Subnet
IP
network, but
LAN
Server range is
Server"
DHCP
address conflicts.The factory
Server option is Off,
address of the Gateway.
IP
Server
DHCP
addresses.
IP
addresses.
IP
address.
IP
IP
16