Windows Me; Windows 2000 - ActionTec GT724-WG User Manual

12. The "System Settings Change" window appears, asking whether the computer should be restarted.
Click Yes.
The computer restarts. It is now set up with a static
Configurator utility (as shown in chapters 3, 4, 5, and 6).

Windows Me

1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
95 Appendix b Setting Up Static IP on the Computer
3. Another menu appears. Select Control Panel.
4. When the "Control Panel" window appears, double-click Network.
96 Actiontec 54 Mbps Wireless DSL Gateway User Manual
5. The "Network" window appears. In the "The following network components are installed" list box,
locate and double-click
6. The " Properties" window appears. Click
TCP/IP
7. In the
Address tab, make sure the circle next to "Specify an
IP
black dot appears in the circle. If the circle already contains a black dot, leave it alone.
8. Enter the following address in the "
by pressing the space bar on the keyboard.
97 Appendix b Setting Up Static IP on the Computer
9. Enter the following address in the "Subnet mask" text box:
address by pressing the space bar on the keyboard.
10. Click
. The
OK TCP/IP
11. If there is a check in the box next to "Detect connection to network media," click on it to uncheck the
box.
12. In the Network window, click
13. The "System Settings Change" window appears, asking whether the computer should be restarted.
Click Yes.
The computer restarts. It is now set up with a static
Configurator utility (as shown in chapters 3, 4, 5, and 6).

Windows 2000

1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
98 Actiontec 54 Mbps Wireless DSL Gateway User Manual
3. Another menu appears. Select Control Panel.
4. When the "Control Panel" window appears, double-click Network and Dial-up Connections.
.
TCP/IP
Address" text box:
IP
Properties window disappears.
. The Network window disappears.
OK
address, allowing access to the Gateway's Web
IP
Address.
IP
Address" is selected. When active, a
IP
Enter the periods in the address
192.168.0.2
255.255.255.0
address, allowing access to the Gateway's Web
IP
Enter the periods in the
37