Table of Contents
Advertisement
Actiontec USB/Ethernet DSL Gateway User Manual
LAN IP Address
Selecting LAN IP Address in the "Configuring the Advanced Settings" screen gen-
erates the "
LAN IP
The values in the
"Device IP
address and Subnet mask of the Gateway as seen on the network. These values
IP
can be modified for your
default factory settings (
☞
Note: If the Gateway's
Server range is within the same subnet. For more infor-
DHCP
mation, see "
After changing settings, click Next or Back to continue, or Save and Restart to
make all changes permanent.
DHCP Server
Selecting
Server in the "Configuring the Advanced Settings" screen gener-
DHCP
ates the "
Server" screen. The Gateway has a built-in
DHCP
Configuration Protocol) server that automatically assigns a different
each computer on the network, eliminating
The factory default setting is On. To disable the
Address" screen.
Address" and "Device
network, but Actiontec recommends keeping the
LAN
address 192.168.0.1 Subnet mask 255.255.255.0).
IP
LAN IP
Server Configuration."
DHCP
Netmask" text boxes are the
LAN
Address is modified, ensure the
address conflicts.
IP
Server, select Off.
DHCP
40
(Dynamic Host
DHCP
address to
IP
Advertisement
Table of Contents
