Using Advanced Setup; Accessing Advanced Setup; Wan Ip Address - ActionTec GT724-WG User Manual

Using Advanced Setup

This section contains information concerning setting up the advanced features of the Gateway, such as
wireless settings, remote management, and Web site blocking, using the Gateway's Web Configurator.

Accessing Advanced Setup

To access the Web Configurator's Advanced Setup screens:
1. Open a Web browser. In the "Address" text box type:
keyboard.
2. The "Main Menu" screen appears. Select Setup/Configuration.
3. In the "Set Up/Configuration" screen, read the instructions, then select Advanced Setup from the menu
on the left side.
4. In the next screen, read the recommendations. To perform an advanced setup on the Gateway, click
Begin Advanced Setup.
5. The "Configuring the Advanced Settings" screen appears. To check all the settings, or if unsure of which
settings to modify, select Next. To modify a specific configuration, click on its name in the menu bar
on the left.
?
Note: To save changes made in any of the Advanced Setup screens, click Save and
Restart at the bottom of the gray menu on the left side of the screen.

WAN IP Address

Selecting Address in the "Configuring the Advanced Settings" screen generates the "
WAN IP
Address" screen.
WAN IP
ways to do this: Transparent Bridging, Obtain an
Through , Obtain an IP Address through
PPPoA
?
Note: If unsure about which connection is present, check with the Internet Service
Provider ( before continuing.
ISP)
39 Chapter 4 Using Advanced Setup
After selecting a connection type, click Next to continue configuring the connection.
Actiontec 54 Mbps Wireless DSL Gateway User Manual
Address allows manual set up of the IP address of the Gateway. There are five
http://192.168.0.1
3
Address through
IP PPP
, and Specify a Static
DHCP
4
then press Enter on the
WAN IP
o , Obtain an Address
E IP
Address.
IP
14